Deta DB501: drop-in battery for your car 50Ah 12V 450A images
Deta
Ref. BON-DETA-DB501 Deta DB501: drop-in battery for your car 50Ah 12V 450A
- Nominal voltage
- 12V
- Capacity, 20-hour rate
- 50Ah
- Cold cranking current (EN)
- 450A
- Dimensions (mm)
- 207×175×190
- Battery technology
- Lead-acid
Shipping and lead times
- Mainland Spain1-2 working days · order before 17:00Free
- Express «14 horas»Next day before 16:00 · order before 17:30By weight
- Balearic Islands1-3 working daysBy weight
- Portugal3-4 working daysBy weight
- Europe: FR, IT, DE, BE, NL1-5 working daysBy weight
Canary Islands, Ceuta and Melilla: ask us.
Payment: Bank transferCash on delivery (+4 %, min. €4)
EU businesses with a VAT number: buy without VAT.
12VVoltage
50AhAmp-hours at C20
450AStarting power (EN)
Quick answer: Spec sheet headline for the Deta DB501: 50Ah 12V 450A, made with cars and vans in mind. Every figure that decides the fit is in the table below.
Deta DB501 in everyday use
A van that does a hundred short drops a day starts its engine again and again. Wipe the tray clean and dry before the new battery goes in. Batteries rarely fail on a warm day; winter usually exposes them.
Deta DB501: dimensions and ratings
| Make | Deta |
| Part number | DB501 |
| Product line | DETA Power |
| Used for | cars and vans |
| Voltage | 12V |
| Amp-hours at C20 | 50Ah |
| Starting power (EN) | 450A |
| Technology | Lead-acid |
| Size L × W × H | 207 × 175 × 190 mm |
| Battery weight | 12.2 kg |
| Positive terminal | positive on the left-hand side |
| EAN barcode | 3661024024525 |
Care tips for lead-acid batteries
Six cells of about two volts each make up a typical 12-volt battery. Starting engines is the classic job for a lead-acid battery. Most basic chargers already suit a wet-cell battery perfectly well.
Same case, same terminal side
Listed below: batteries with the same case and polarity as the Deta DB501.
Exide EB501Fulmen FB501Tudor TB501Kronobat SD-45.1Varta B20
Questions and answers
Does the Deta DB501 have an EAN?
The barcode number is 3661024024525. Workshops use it to match orders exactly.
Will this battery fit my vehicle or equipment?
Read the part number on your existing battery and look up the original fitment in the manual. If either points to DB501, or the figures agree, it will work.
How long does ordering take at baterias.online?
Only a few minutes once you have checked the figures and the code.
Which code identifies my existing battery?
Most makers print the code on the lid or side label, close to the brand logo. Type the brand and that code into the search box to land on the right page.
About the Deta DB501
If the sticker under your bonnet says Deta DB501, this page is for you. Rated 50Ah, there is enough reserve for the alarm, the clock and the odd evening with the radio on. Plenty of drivers buy batteries online now that every figure is shown up front.
50Ah puts it squarely in the middle of the range for cars and vans.
More options
Keep the code DB501 handy for next time: it makes reordering at baterias.online quick. Writing the fitting date on the battery helps when planning the next replacement.
Quick compatibility checklist
- ✓ Cold cranking 450A: compare with your handbook's requirement.
- ✓ Set your charger to lead-acid before the first charge.
- ✓ Check 207 × 175 × 190 mm against the tray, not just the old battery.
-
Brand
-
ReferenceBON-DETA-DB501
-
EAN133661024024525
-
MPNDB501
Specifications
| Brand | Deta |
|---|---|
| Product line | DETA Power |
| Used for | Cars and vans |
| Battery technology | Lead-acid |
| Nominal voltage | 12V |
| Capacity, 20-hour rate | 50Ah |
| Cold cranking current (EN) | 450A |
| Length | 207 mm |
| Width | 175 mm |
| Height | 190 mm |
| Weight | 12.2 kg |
| Terminal polarity | Positive on the left-hand side |
Documents
Viewed products
UPS and Standby
Ritar RL2400 standby battery for backup systems
- 2V
- 400Ah (C10)
- Dimensions: 170×150×342 mm
Price:
€238.07
VAT incl.