12VVoltage
180AhCapacity (C20)
1000ACold cranking amps
Summary: Short version: Deta DJ1805, made for trucks and farm machinery, with a rating of 180Ah 12V 1000A. Every figure that decides the fit is in the table below.
Practical advice for trucks and farm machinery
A school bus parked over the summer holidays often needs a charge before term. Check the battery box drain holes are clear on lorries. A slow, laboured crank on a frosty morning often comes first.
Technical figures at a glance
MakeDeta
Part numberDJ1805
RangeDETA PowerPRO Agricultura y Construccion
Used fortrucks and farm machinery
Voltage12V
Capacity (C20)180Ah
Cold cranking amps1000A
ChemistryLead-acid
Size L × W × H510 × 218 × 225 mm
Battery weight43 kg
Layout code3
EAN barcode3661024026543
lead-acid: how it works
Wet lead batteries started engines long before the first motorway was built. Older cars without stop-start systems are happy with a standard lead-acid battery. Keep a flooded battery charged in cold weather.
Same size and layout
Same format, different makers: these alternatives match the Deta DJ1805 in size and layout.
Exide EJ1805Fulmen FJ1805
Your questions answered
Can I identify this battery by its barcode?
Yes: the EAN is 3661024026543. Retailers and workshops use this number to identify the product unambiguously.
How can I be sure the Deta DJ1805 is compatible?
Read the code on your old unit and set it beside DJ1805, then check dimensions, terminal layout and electrical ratings on this page. If all of them match, the replacement is equivalent.
Why choose the Deta DJ1805
Big engines and long days: that is the world of the Deta DJ1805, rated 180Ah 12V 1000A. Every published figure for the Deta DJ1805 sits in the table, ready for a fleet comparison. The Deta DJ1805 page brings together what a fleet manager needs to compare in one place.
Most batteries for trucks and farm machinery land close to 180Ah, and this one does too. 43 kg is a modest weight for what it stores.
More options
Ordering the Deta DJ1805 online at baterias.online is simple once the code checks out. A tidy, clean tray gives the new battery a better start.
Quick compatibility checklist
- ✓ Set your charger to lead-acid before the first charge.
- ✓ A case of 510 × 218 × 225 mm must sit flat with the clamp closed.
- ✓ Rated 180Ah: check that the charger or alternator in your system can refill a battery of that capacity in reasonable time.
