Exide
Ref. BON-EXIDE-12N7-3B Exide 12N7-3B motorbike battery replacement, rated 7Ah 12V 75A
- Nominal voltage
- 12V
- Capacity, 20-hour rate
- 7Ah
- Cold cranking current (EN)
- 75A
- Dimensions (mm)
- 135×75×135
- Battery technology
- Lead-acid
Shipping and lead times
- Mainland Spain1-2 working days · order before 17:00Free
- Express «14 horas»Next day before 16:00 · order before 17:30By weight
- Balearic Islands1-3 working daysBy weight
- Portugal3-4 working daysBy weight
- Europe: FR, IT, DE, BE, NL1-5 working daysBy weight
Canary Islands, Ceuta and Melilla: ask us.
Payment: Bank transferCash on delivery (+4 %, min. €4)
EU businesses with a VAT number: buy without VAT.
At a glance: What you are looking at: the Exide 12N7-3B, a 7Ah 12V 75A battery for motorcycles and quads. Before anything else, measure the space: the case comes to 135 × 75 × 135 mm.
Exide 12N7-3B: what it is and who it suits
From commuter scooters to trail bikes, plenty of machines run on a Exide 12N7-3B. Built with lead-acid technology, it suits riders who want a battery to match their charging setup. The Exide 12N7-3B page covers everything worth checking before the seat comes off.
A capacity of 7Ah matches what many vehicles and machines in this group expect.
Exide 12N7-3B data sheet
| Brand | Exide |
| Part number | 12N7-3B |
| Product line | EXIDE Conventional |
| Suits | motorcycles and quads |
| Volts | 12V |
| Capacity, 20-hour rate (C20) | 7Ah |
| Cold cranking current (EN) | 75A |
| Battery technology | Lead-acid |
| Outer measurements | 135 × 75 × 135 mm |
| Weight | 2.9 kg |
| Terminal polarity | positive on the right-hand side |
| Terminal type | M06 |
| EAN | 3661024033190 |
Exide 12N7-3B in everyday use
Classic bikes with kick-start still rely on the battery for lights and ignition. Tighten terminal bolts firmly but do not strip the small threads. Choosing a battery by size alone and ignoring terminal positions leads to cables that will not reach.
The lead-acid technology explained
Charging turns lead sulphate back into active material. Flooded batteries handle hot engine bays well. Keep a flooded battery upright and the vent path clear.
Check before ordering
- ✓ A different chemistry from lead-acid may need system changes.
- ✓ Measure the space available: the case takes up 135 × 75 × 135 mm, and a few millimetres too many can stop the hold-down from closing.
- ✓ Plus post: positive on the right-hand side. Check yours before ordering.
Frequently asked questions
Are there other sizes in the same series?
It belongs to EXIDE Conventional. If you need a different size with the same construction, look within that range.
What is the EAN barcode of the Exide 12N7-3B?
Yes: the EAN is 3661024033190. Retailers and workshops use this number to identify the product unambiguously.
Is this the right replacement for my current battery?
Measure the outgoing battery, note its terminal corner and ratings; matching figures mean a compatible swap.
Can I order a battery for motorcycles and quads at baterias.online?
Yes. Put it in your cart from this page and finish checkout online.
Alternatives that fit the same space
Cannot find the Exide 12N7-3B you want? These share the same size and terminal layout.
Varta YB7L-BExide EB7L-BFulbat FB7L-B2
See also
Prefer to order now and fit at the weekend? baterias.online makes that easy. Checking the terminal side takes ten seconds and saves a lot of bother.
-
Brand
-
ReferenceBON-EXIDE-12N7-3B
-
EAN133661024033190
-
MPN12N7-3B
Specifications
| Brand | Exide |
|---|---|
| Product line | EXIDE Conventional |
| Used for | Motorcycles and quads |
| Battery technology | Lead-acid |
| Nominal voltage | 12V |
| Capacity, 20-hour rate | 7Ah |
| Cold cranking current (EN) | 75A |
| Length | 135 mm |
| Width | 75 mm |
| Height | 135 mm |
| Weight | 2.9 kg |
| Terminal polarity | Positive on the right-hand side |
| Terminals | M06 |
Documents
4 other products in the same category
- 12V
- 16Ah
- 100A
- Dimensions: 180×75×165 mm
Viewed products
- 6V
- 330Ah
- Dimensions: 296×176×366 mm