Exide E60-N24AL-B | two-wheelers, ATVs and personal watercraft | 28Ah 12V 280A

In short: One code, one battery: Exide E60-N24AL-B, 28Ah 12V 280A, for motorcycles and quads. Before anything else, measure the space: the case comes to 185 × 125 × 175 mm.

Buying the Exide E60-N24AL-B online

Riding a bike that takes a Exide E60-N24AL-B? This is the page. With 280A for starting, a cold engine gets a fair spin. Picking by exact code avoids a seat that will not close.

With 28Ah, it outlasts most batteries for motorcycles and quads on a single charge.

Will the Exide E60-N24AL-B fit?

• ✓ Capacity is 28Ah. Aim for the same figure as your old battery or slightly above, never much lower.
• ✓ Starting current 280A: look for the EN value on your old label and choose this reference only if it is equal or higher.
• ✓ These are M11 terminals. Photograph the old ones before ordering to compare side by side.

Exide E60-N24AL-B data sheet

Questions buyers ask about the Exide E60-N24AL-B

About the technology: lead-acid

Wet lead batteries started engines long before the first motorway was built. Older cars without stop-start systems are happy with a standard lead-acid battery. Avoid deep discharges, which encourage sulphation.

Same case, same terminal side

Listed below: batteries with the same case and polarity as the Exide E60-N24AL-B.

Exide E60-N24L-AExide 12N24-3A

Related products and ranges

A photo of the old label plus this page is all it takes to order with confidence at baterias.online. Have a spanner and a wire brush ready on the day.

• Browse the full range for motorcycles and quads
• See every Exide reference

Fitting and everyday care

Classic bikes with kick-start still rely on the battery for lights and ignition. Test the lights and horn before refitting the seat. Choosing a battery by size alone and ignoring terminal positions leads to cables that will not reach.