Exide EJ050C | lorries, coaches, tractors and plant | 50Ah 12V 800A

In short: What you are looking at: the Exide EJ050C, a 50Ah 12V 800A battery for trucks and farm machinery. Measure twice, order once: dimensions decide most swaps.

Why choose the Exide EJ050C

Big diesel engines in coaches, combines and telehandlers often rely on a Exide EJ050C. With the positive on the left-hand side, the heavy cables on vehicles that used this code line up without strain. The Exide EJ050C page brings together what a fleet manager needs to compare in one place.

50Ah keeps the battery small, handy for tight trays. Hard starts are less likely with 800A on tap.

Five checks for a perfect fit

• ✓ It comes with SAE M 3/8"- 5/16" taper&stud terminals, so check that your leads, lugs or plugs can attach to them without adapters.
• ✓ Check that the alternator or controller suits AGM.
• ✓ Make room for 260 × 173 × 206 mm, including clearance above the posts.

Full specifications of the Exide EJ050C

Questions and answers

About the technology: AGM

Gas produced during charging recombines inside an AGM battery, so it loses almost no water. Recharging is quick with AGM, handy for vehicles that do short trips. Charge an AGM battery in a cool, ventilated place.

Alternatives that fit the same space

If you prefer another make, these fit the same space with the same terminal side.

Deta DJ050CFulmen FJ050C

Related products and ranges

Everything you need to order the Exide EJ050C is on this page. Measuring the space before ordering avoids a battery that will not sit flat.

• More for trucks and farm machinery
• See every Exide reference

Installation and maintenance tips

Harvest week, the combine has stood since last year and the starter barely turns. Wipe mud and dust off the battery top to stop small leakage currents. Mixing a fresh battery and a worn one in a 24-volt set is a classic mistake: both fail early.