Exide
Ref. BON-EXIDE-EK620 Exide EK620 – 62Ah 12V 680A – made for frequent restarts in city traffic
- Nominal voltage
- 12V
- Capacity, 20-hour rate
- 62Ah
- Cold cranking current (EN)
- 680A
- Dimensions (mm)
- 242×175×190
- Battery technology
- AGM
VAT incl.Free shipping to mainland Spain
Shipping and lead times
- Mainland Spain1-2 working days · order before 17:00Free
- Express «14 horas»Next day before 16:00 · order before 17:30By weight
- Balearic Islands1-3 working daysBy weight
- Portugal3-4 working daysBy weight
- Europe: FR, IT, DE, BE, NL1-5 working daysBy weight
Canary Islands, Ceuta and Melilla: ask us.
Payment: Bank transferCash on delivery (+4 %, min. €4)
EU businesses with a VAT number: buy without VAT.
At a glance: One code, one battery: Exide EK620, 62Ah 12V 680A, for start-stop vehicles. Compare the code on your old battery with EK620 before ordering.
Exide EK620 for start-stop vehicles
Your car switches off at the lights? Then a battery like the Exide EK620 is what it expects. Stop-start cars expect the same chemistry they were built with, and the table below names it. Search Exide EK620 and you reach a page with nothing to decode.
Most batteries for start-stop vehicles land close to 62Ah, and this one does too. Cold starts are well covered: 680A is above the norm for its class.
Make sure it fits your vehicle or equipment
- ✓ With 62Ah of capacity, hold it up to the figure on the outgoing unit or in your equipment manual.
- ✓ Starting current 680A: look for the EN value on your old label and choose this reference only if it is equal or higher.
- ✓ The technology is AGM. Keep the same type as the original, and confirm your charger offers a matching profile.
Full specifications of the Exide EK620
Common questions about the Exide EK620
How strong is this battery when starting?
680A under the EN test. Diesel engines usually need more cranking power than petrol engines of the same size.
How do I compare size and polarity?
Measure your current battery and note its terminal position. This one is 242 × 175 × 190 mm, positive on the right-hand side.
How should I store the Exide EK620 if I don't fit it immediately?
Keep it upright somewhere cool and dry, and charge it before fitting if it has been stored for a while.
How large and heavy is this battery?
The case measures 242 × 175 × 190 mm and the battery weighs 17.9 kg. Check both against your tray and the hold-down before ordering, and lift it with care.
What AGM means for you
Picture a sponge holding the acid: that is roughly how an AGM cell works. Ambulances and police cars use AGM for their heavy electrical loads. Keep AGM terminals clean and tight.
Alternatives that fit the same space
Other references from our catalogue with the same measurements and terminal position.
Deta DK620Fulmen FK620Tudor TK620Deta DK600Deta DL600
See also
Everything on baterias.online is filed by brand and reference, so ordering the Exide EK620 is straightforward. Checking the data first saves the hassle of a wrong order.
Getting the best from the Exide EK620
Plenty of owners notice the eco-stop light rarely comes on any more and wonder why. Keep the car locked during the swap so the alarm does not trigger. Slow restarts at lights are worth checking before they become a breakdown.
-
Brand
-
ReferenceBON-EXIDE-EK620
-
EAN133661024037891
-
MPNEK620
Specifications
| Brand | Exide |
|---|---|
| Product line | EXIDE AGM |
| Used for | Start-stop vehicles |
| Battery technology | AGM |
| Nominal voltage | 12V |
| Capacity, 20-hour rate | 62Ah |
| Cold cranking current (EN) | 680A |
| Length | 242 mm |
| Width | 175 mm |
| Height | 190 mm |
| Weight | 17.9 kg |
| Terminal polarity | Positive on the right-hand side |
Documents
4 other products in the same category
- 12V
- 80Ah
- 800A
- Dimensions: 315×175×190 mm
- 12V
- 100Ah
- 900A
- Dimensions: 353×175×190 mm
- 12V
- 95Ah
- 800A
- Dimensions: 306×173×222 mm
Viewed products
- 12V
- 180Ah
- 1000A
- Dimensions: 513×223×223 mm
- 12V
- 24Ah
- 160A
- Dimensions: 165×176×125 mm