Exide ET4B-BS motorbike battery replacement, rated 2Ah 12V 35A images
Exide
Ref. BON-EXIDE-ET4B-BS Exide ET4B-BS motorbike battery replacement, rated 2Ah 12V 35A
- Nominal voltage
- 12V
- Capacity, 20-hour rate
- 2Ah
- Cold cranking current (EN)
- 35A
- Dimensions (mm)
- 115×40×85
- Battery technology
- AGM
Price:
€26.36
Tax included
VAT incl.Free shipping to mainland Spain
Shipping and lead times
- Mainland Spain1-2 working days · order before 17:00Free
- Express «14 horas»Next day before 16:00 · order before 17:30By weight
- Balearic Islands1-3 working daysBy weight
- Portugal3-4 working daysBy weight
- Europe: FR, IT, DE, BE, NL1-5 working daysBy weight
Canary Islands, Ceuta and Melilla: ask us.
Payment: Bank transferCash on delivery (+4 %, min. €4)
EU businesses with a VAT number: buy without VAT.
12VVoltage
2AhCapacity, 20-hour rate (C20)
35ACold cranking amps
In short: What you are looking at: the Exide ET4B-BS, a 2Ah 12V 35A battery for motorcycles and quads. Every figure that decides the fit is in the table below.
Fitting and everyday care
Modern bikes with alarms and trackers drain a little current even when parked. Fill a dry-charged battery cell by cell with its own acid and let it rest before charging. Charging a small battery on a high-amp car charger can overheat and damage it.
Measurements, ratings and codes
MakeExide
Model codeET4B-BS
Product lineEXIDE MOTORCYCLE AGM 12V
Used formotorcycles and quads
Voltage12V
Capacity, 20-hour rate (C20)2Ah
Cold cranking amps35A
TechnologyAGM
Outer measurements115 × 40 × 85 mm
Weight0.9 kg
Layout4
Terminal typeM13
EAN barcode3661024033701
About the technology: AGM
Lead plates in AGM batteries are often slightly thinner than in flooded types. Many modern cars with brake energy recovery were designed around AGM from the start. Check that the vent hose is connected if the battery sits inside the vehicle.
Questions and answers
Are the terminals of this battery standard?
The terminals are M13. If your equipment uses a different connector, you will need the appropriate adapter or lug.
What range does the Exide ET4B-BS come from?
It belongs to the EXIDE MOTORCYCLE AGM 12V line from Exide. Other models in the same line share the construction and differ mainly in size and capacity.
What is the EAN barcode of the Exide ET4B-BS?
Its EAN is 3661024033701; you will usually spot it near the barcode on the box.
Will the Exide ET4B-BS replace my old battery?
Hold your old label up to ET4B-BS. Same code plus same size and terminal side means a direct swap.
Why choose the Exide ET4B-BS
Your scooter, naked bike or quad takes a Exide ET4B-BS? Here are its details. Small batteries for motorcycles and quads differ in details you only see side by side. The Exide ET4B-BS page sets out the details before any panel comes off.
2Ah keeps the battery small, handy for tight trays. 35A gives more starting power than most batteries of similar dimensions.
Explore more
Keep the code ET4B-BS handy for next time: it makes reordering at baterias.online quick. Checking the terminal side takes ten seconds and saves a lot of bother.
Quick compatibility checklist
- ✓ Do not go far below your old battery's capacity; this one has 2Ah.
- ✓ Cold cranking current reaches 35A. It ought to equal the carmaker's requirement at minimum, more so for diesels in cold winters.
- ✓ Terminal type: M13. Make sure your cable clamps or connectors suit it before fitting.
-
Brand
-
ReferenceBON-EXIDE-ET4B-BS
-
EAN133661024033701
-
MPNET4B-BS
Specifications
| Brand | Exide |
|---|---|
| Product line | EXIDE MOTORCYCLE AGM 12V |
| Used for | Motorcycles and quads |
| Battery technology | AGM |
| Nominal voltage | 12V |
| Capacity, 20-hour rate | 2Ah |
| Cold cranking current (EN) | 35A |
| Length | 115 mm |
| Width | 40 mm |
| Height | 85 mm |
| Weight | 0.9 kg |
| Layout code | 4 |
| Terminals | M13 |
Documents
4 other products in the same category
Motorcycle
Fulbat FTX4L-BS / FTZ5S-BS motorbike battery replacement
- 12V
- 4.2Ah
- 50A
- Dimensions: 113×70×85 mm
Price on request
