12VVoltage
135AhCapacity (C20)
700AStarting power (EN)
Quick answer: Quick facts on the Exide ET950: intended for boats and motorhomes, rated 135Ah 12V 700A. Owners usually check three things first: size, terminal side and starting power.
Installation and maintenance tips
Narrowboat crews rely on their batteries for days between charges. Use the same cable length for each battery in a parallel bank. Corroded terminals in a damp locker cause many apparent faults.
Measurements, ratings and codes
ManufacturerExide
Part numberET950
RangeEXIDE MARINA DUAL ET
Suitsboats and motorhomes
Voltage12V
Capacity (C20)135Ah
Starting power (EN)700A
Watt-hours950 Wh
Battery technologyLead-acid
Size L × W × H513 × 189 × 223 mm
Battery weight39.5 kg
Layout3
EAN barcode3661024035897
Care tips for lead-acid batteries
Wet-cell batteries have powered engine starting for more than a century. Fleet vehicles often use flooded batteries for value. Recycle old batteries at an authorised point.
Other options with identical dimensions
Other references from our catalogue with the same measurements and terminal position.
Q-Battery 12SEM-137Exide EN900Exide EP1200Exide ER660Varta LED140
Answers before you buy
What if I do not know my battery reference?
Look on the battery label for the part number and search for it with the brand name. That leads directly to the matching product page.
What is the watt-hour rating?
The rated energy is 950 Wh. It is a useful number for comparing batteries of different voltages.
How much weight should I expect to lift?
At 39.5 kg, one person can usually manage with care; bigger batteries are easier with two.
Why choose the Exide ET950
Rated 135Ah 12V 700A, the Exide ET950 serves boats and motorhomes. Every figure published for the Exide ET950 is on this page for planning the installation on paper. Matching a whole bank is easier at baterias.online, where each model keeps its exact code.
135Ah puts it squarely in the middle of the range for boats and motorhomes.
More options
Ordering the Exide ET950 online at baterias.online is simple once the code checks out. If in doubt about the fit, compare once more with the figures above.
Quick compatibility checklist
- ✓ Measure the space available: the case takes up 513 × 189 × 223 mm, and a few millimetres too many can stop the hold-down from closing.
- ✓ Capacity is 135Ah. Aim for the same figure as your old battery or slightly above, never much lower.
- ✓ Starting current 700A: look for the EN value on your old label and choose this reference only if it is equal or higher.
