Fulbat FDC-CM24-100 · 100Ah 25.6V · motive power for forklifts and floor cleaners images
Fulbat
Ref. BON-FULBAT-FDC-CM24-100 Canary Islands, Ceuta and Melilla: ask us.
Payment: Bank transferCash on delivery (+4 %, min. €4)
EU businesses with a VAT number: buy without VAT.
Summary: Spec sheet headline for the Fulbat FDC-CM24-100: 100Ah 25.6V, made with traction and industrial equipment in mind. Weight is 27.5 kg, worth knowing before you lift it out of the tray.
Cleaning contractors keep the Fulbat FDC-CM24-100 on their parts lists. Built with lithium (LiFePO4) technology, it expects to be run down hard and refilled once the shift ends. Searching by exact code keeps a set matched.
With 100Ah, it suits smaller engines and machines with few accessories.
Nominal voltage is 25.6V and capacity 100Ah. Wiring two in series doubles the voltage, while parallel wiring doubles the capacity.
Polarity: positive on the right-hand side. Face the long side with the posts nearest you to compare.
No liquid acid is involved in lithium chemistry. A campervan swapping two lead batteries for one lithium often ends up with more usable energy. Check alternator compatibility before switching to lithium.
When the numbers match, the Fulbat FDC-CM24-100 can be ordered online at baterias.online in a few minutes. Once the battery is in, keep the old one for recycling at an authorised point.
A forklift working two shifts needs every amp-hour its battery can give. Make sure the charger matches the voltage and the lithium (LiFePO4) chemistry. Swapping a single block in a series set rarely lasts: the weakest battery limits the pack.
| Brand | Fulbat |
|---|---|
| Product line | FULBAT FDC Deep Cycle LiFePO4 |
| Used for | Traction and industrial equipment |
| Battery technology | Lithium (LiFePO4) |
| Nominal voltage | 25.6V |
| Capacity, 20-hour rate | 100Ah |
| Length | 330 mm |
| Width | 340 mm |
| Height | 225 mm |
| Weight | 27.5 kg |
| Terminal polarity | Positive on the right-hand side |
| Terminals | T11 |
