In short: Quick facts on the Fulbat FP12-12FR: intended for UPS and standby systems, rated 12Ah 12V. Owners usually check three things first: size, terminal side and starting power.
Fulbat FP12-12FR for UPS and standby systems
Server cabinets, security panels and exit lights often rely on a Fulbat FP12-12FR. Spade terminals come in different widths, so check them closely. Once the code matches, ordering at baterias.online takes a few minutes.
Most batteries for UPS and standby systems land close to 12Ah, and this one does too.
12VVoltage
12AhCapacity (C20)
3.24 kgWeighs
Check before ordering
- ✓ Set your charger to AGM before the first charge.
- ✓ Measure the space available: the case takes up 151 × 98 × 101 mm, and a few millimetres too many can stop the hold-down from closing.
- ✓ With 12Ah of capacity, hold it up to the figure on the outgoing unit or in your equipment manual.
Full specifications of the Fulbat FP12-12FR
Questions buyers ask about the Fulbat FP12-12FR
Can I use my usual charger with this battery?
Its technology is AGM. The table above repeats it next to the size and ratings.
What connector type is fitted to this battery?
Terminal type: T2. Compare with the posts or tabs on your current battery.
About the technology: AGM
Many glass-mat designs tolerate sideways mounting, as long as the maker says so. Wheelchairs and scooters often use AGM for clean, sealed power. Too much voltage makes the valves vent gas that can never be replaced.
See also
Everything on baterias.online is filed by brand and reference, so ordering the Fulbat FP12-12FR is straightforward. Measuring the space before ordering avoids a battery that will not sit flat.
Fulbat FP12-12FR in everyday use
Home alarm panels beep at night when their batteries weaken. Disconnect the load before working on a UPS without hot-swap. Swollen cases in a UPS are a sign of overcharging or old age.
