Fulbat
Ref. BON-FULBAT-FP12-18FR Fulbat FP12-18FR · 18Ah 12V · backup battery for UPS, alarm panels and telecom racks
- Nominal voltage
- 12V
- Capacity, 20-hour rate
- 18Ah
- Dimensions (mm)
- 181.5×76.5×167.5
- Battery technology
- AGM
Shipping and lead times
- Mainland Spain1-2 working days · order before 17:00Free
- Express «14 horas»Next day before 16:00 · order before 17:30By weight
- Balearic Islands1-3 working daysBy weight
- Portugal3-4 working daysBy weight
- Europe: FR, IT, DE, BE, NL1-5 working daysBy weight
Canary Islands, Ceuta and Melilla: ask us.
Payment: Bank transferCash on delivery (+4 %, min. €4)
EU businesses with a VAT number: buy without VAT.
In short: What you are looking at: the Fulbat FP12-18FR, a 18Ah 12V battery for UPS and standby systems. Compare the code on your old battery with FP12-18FR before ordering.
Full specifications of the Fulbat FP12-18FR
| Manufacturer | Fulbat |
| Model code | FP12-18FR |
| Range | FULBAT FP General Purpose |
| Used for | UPS and standby systems |
| Nominal voltage | 12V |
| Capacity (C20) | 18Ah |
| Technology | AGM |
| Outer measurements | 181.5 × 76.5 × 167.5 mm |
| Weight | 5.35 kg |
| Layout code | 2 |
| Terminals | T12 |
Installation and maintenance tips
A power cut at the office is when everyone finds out whether the UPS batteries were up to the job. Keep UPS units and battery cabinets ventilated and away from radiators. Forgetting to note installation dates leads to batteries left in service far too long.
Batteries with the same format
Other references from our catalogue with the same measurements and terminal position.
Fulbat FP12-18Fulbat FP12-20
Fulbat FP12-18FR: what it is and who it suits
Here is the Fulbat FP12-18FR, a battery for UPS and standby systems. Standby batteries are judged on voltage, capacity and terminal fit. Facility managers buy batteries online for planned replacement cycles.
Nothing unusual about 18Ah: a standard capacity for UPS and standby systems.
Questions and answers
Should I charge a stored battery before use?
Store it fully charged, away from heat and frost, and give it a refresh charge before installation.
Will the Fulbat FP12-18FR fit my battery space?
At 181.5 × 76.5 × 167.5 mm and 5.35 kg, it needs a tray of that size and a careful lift.
What voltage and amp-hours does this model have?
It is a 12V battery with a capacity of 18Ah. In banks of several units, connect only identical batteries bought at the same time.
Does my charger suit the technology of this battery?
It is built with AGM technology. Pick charging equipment with a matching mode and avoid storing it discharged.
Quick compatibility checklist
- ✓ Measure the space available: the case takes up 181.5 × 76.5 × 167.5 mm, and a few millimetres too many can stop the hold-down from closing.
- ✓ Capacity 18Ah: equal to or a little above your old label is ideal.
- ✓ These are T12 terminals. Photograph the old ones before ordering to compare side by side.
Explore more
Prefer to compare first? The links below lead to other options for UPS and standby systems on baterias.online. Recycling the old battery is easy at most tips and garages.
About the technology: AGM
Gas produced during charging recombines inside an AGM battery, so it loses almost no water. Many modern cars with brake energy recovery were designed around AGM from the start. Recharge an AGM battery promptly after deep use.
-
Brand
-
ReferenceBON-FULBAT-FP12-18FR
-
MPNFP12-18FR
Specifications
| Brand | Fulbat |
|---|---|
| Product line | FULBAT FP General Purpose |
| Used for | UPS and standby systems |
| Battery technology | AGM |
| Nominal voltage | 12V |
| Capacity, 20-hour rate | 18Ah |
| Length | 181.5 mm |
| Width | 76.5 mm |
| Height | 167.5 mm |
| Weight | 5.35 kg |
| Layout code | 2 |
| Terminals | T12 |
Documents
4 other products in the same category
- 12V
- 2.1Ah
- Dimensions: 178×35×60 mm
Viewed products
- 12V
- 100Ah
- 830A
- Dimensions: 353×175×190 mm