- 12V
- 2.1Ah
- Dimensions: 182×23×61 mm
Fulbat
Ref. BON-FULBAT-FP12-2.9 Fulbat FP12-2.9: sealed standby cell for emergency power 2.9Ah 12V
- Nominal voltage
- 12V
- Capacity, 20-hour rate
- 2.9Ah
- Dimensions (mm)
- 79×56×105
- Battery technology
- AGM
Shipping and lead times
- Mainland Spain1-2 working days · order before 17:00Free
- Express «14 horas»Next day before 16:00 · order before 17:30By weight
- Balearic Islands1-3 working daysBy weight
- Portugal3-4 working daysBy weight
- Europe: FR, IT, DE, BE, NL1-5 working daysBy weight
Canary Islands, Ceuta and Melilla: ask us.
Payment: Bank transferCash on delivery (+4 %, min. €4)
EU businesses with a VAT number: buy without VAT.
Summary: Here is the Fulbat FP12-2.9 in one line: UPS and standby systems, 2.9Ah 12V. Every figure that decides the fit is in the table below.
Full specifications of the Fulbat FP12-2.9
| Manufacturer | Fulbat |
| Reference | FP12-2.9 |
| Range | FULBAT FP General Purpose |
| Suits | UPS and standby systems |
| Nominal voltage | 12V |
| Capacity (C20) | 2.9Ah |
| Battery technology | AGM |
| Outer measurements | 79 × 56 × 105 mm |
| Weighs | 1.1 kg |
| Layout | 2 |
| Terminals | T1 |
Fitting and everyday care
A power cut at the office is when everyone finds out whether the UPS batteries were up to the job. Check the UPS display after fitting new batteries. Swollen cases point to overcharging or old age.
Buying the Fulbat FP12-2.9 online
Here is the Fulbat FP12-2.9, a battery for UPS and standby systems. Sealed construction lets it sit in a cabinet for years. Searching by exact code keeps a UPS string matched.
Among batteries for UPS and standby systems, 2.9Ah is at the smaller end.
Answers before you buy
Is the Fulbat FP12-2.9 a 12V battery?
Nominal voltage is 12V and capacity 2.9Ah. Wiring two in series doubles the voltage, while parallel wiring doubles the capacity.
Can I use my usual charger with this battery?
Being a AGM battery, it needs charging voltages suited to that chemistry. Smart chargers with a selectable mode take care of this automatically.
Will my existing clamps fit this battery?
Terminal type: T1. Compare with the posts or tabs on your current battery.
Check before ordering
- ✓ Size check: 79 × 56 × 105 mm. A battery even slightly taller than the original can touch the bonnet or the seat base.
- ✓ With 2.9Ah of capacity, hold it up to the figure on the outgoing unit or in your equipment manual.
- ✓ Some equipment needs adapters for T1 terminals.
Explore more
When the numbers match, the Fulbat FP12-2.9 can be ordered online at baterias.online in a few minutes. Note the fitting date somewhere you will find it again.
What AGM means for you
Lead plates in AGM batteries are often slightly thinner than in flooded types. Recharging is quick with AGM, handy for vehicles that do short trips. Leaving a glass-mat battery flat for weeks invites sulphation.
-
Brand
-
ReferenceBON-FULBAT-FP12-2.9
-
MPNFP12-2.9
Specifications
| Brand | Fulbat |
|---|---|
| Product line | FULBAT FP General Purpose |
| Used for | UPS and standby systems |
| Battery technology | AGM |
| Nominal voltage | 12V |
| Capacity, 20-hour rate | 2.9Ah |
| Length | 79 mm |
| Width | 56 mm |
| Height | 105 mm |
| Weight | 1.1 kg |
| Layout code | 2 |
| Terminals | T1 |
Documents
4 other products in the same category
- 12V
- 4.5Ah
- Dimensions: 195×47×76 mm