Fulbat
Ref. BON-FULBAT-FP12-20 Fulbat FP12-20: sealed standby cell for emergency power 20Ah 12V
- Nominal voltage
- 12V
- Capacity, 20-hour rate
- 20Ah
- Dimensions (mm)
- 181.5×77×167.5
- Battery technology
- AGM
Shipping and lead times
- Mainland Spain1-2 working days · order before 17:00Free
- Express «14 horas»Next day before 16:00 · order before 17:30By weight
- Balearic Islands1-3 working daysBy weight
- Portugal3-4 working daysBy weight
- Europe: FR, IT, DE, BE, NL1-5 working daysBy weight
Canary Islands, Ceuta and Melilla: ask us.
Payment: Bank transferCash on delivery (+4 %, min. €4)
EU businesses with a VAT number: buy without VAT.
In short: Need a battery for UPS and standby systems? Consider the Fulbat FP12-20, rated 20Ah 12V. Weight is 5.65 kg, worth knowing before you lift it out of the tray.
Fulbat FP12-20 in everyday use
Gate motors and access systems rely on backup batteries when the mains drops. Check the charging voltage setting on the equipment. Forgetting to note installation dates leads to batteries left in service far too long.
Full specifications of the Fulbat FP12-20
| Brand | Fulbat |
| Reference | FP12-20 |
| Series | FULBAT FP General Purpose |
| Application | UPS and standby systems |
| Nominal voltage | 12V |
| Capacity (C20) | 20Ah |
| Technology | AGM |
| Dimensions (L × W × H) | 181.5 × 77 × 167.5 mm |
| Battery weight | 5.65 kg |
| Terminal layout | 2 |
| Terminals | T12 |
AGM: how it works
Picture a sponge holding the acid: that is roughly how an AGM cell works. Alarm panels and UPS units are classic homes for small AGM blocks. If the original was AGM, the replacement should be AGM too.
Batteries with the same format
Listed below: batteries with the same case and polarity as the Fulbat FP12-20.
Fulbat FP12-18Fulbat FP12-18FR
Frequently asked questions
Which terminals does the Fulbat FP12-20 have?
If your clamps fit T12 terminals, they will fit this battery without adapters.
Are there other sizes in the same series?
Yes, FULBAT FP General Purpose includes other sizes. The brand page lists them.
Is this the right replacement for my current battery?
Compare four things: the voltage, the amp-hours, the outer dimensions and which side the plus post is on. If all match, or capacity is slightly higher, it is a suitable replacement.
Is it easy to buy this battery online?
Search for Fulbat FP12-20, open the page, check the specifications against your current battery and add it to the basket. Checkout takes a few steps and is completed online.
Fulbat FP12-20 for UPS and standby systems
Server cabinets, security panels and exit lights often rely on a Fulbat FP12-20. Terminals of the T12 type should match the spade connectors in your equipment. Comparing batteries online is easier when terminal type is always shown.
20Ah is right in the usual range for UPS and standby systems.
Related products and ranges
Finished comparing? Placing your order online takes a couple of minutes. Not quite the right size? Have a look at other batteries for UPS and standby systems.
Quick compatibility checklist
- ✓ Terminal type: T12. Make sure your cable clamps or connectors suit it before fitting.
- ✓ Set your charger to AGM before the first charge.
- ✓ Check 181.5 × 77 × 167.5 mm against the tray, not just the old battery.
-
Brand
-
ReferenceBON-FULBAT-FP12-20
-
MPNFP12-20
Specifications
| Brand | Fulbat |
|---|---|
| Product line | FULBAT FP General Purpose |
| Used for | UPS and standby systems |
| Battery technology | AGM |
| Nominal voltage | 12V |
| Capacity, 20-hour rate | 20Ah |
| Length | 181.5 mm |
| Width | 77 mm |
| Height | 167.5 mm |
| Weight | 5.65 kg |
| Layout code | 2 |
| Terminals | T12 |
Documents
4 other products in the same category
- 12V
- 6.5Ah
- Dimensions: 150×65×93 mm
- 12V
- 50Ah
- Dimensions: 199×166×171 mm
Viewed products
- 6V
- 435Ah
- Dimensions: 308×174×417 mm
- 12V
- 100Ah
- Dimensions: 260×168×214 mm