Fulbat
Ref. BON-FULBAT-FP12-3.2FR Fulbat FP12-3.2FR · 3.2Ah 12V · backup battery for UPS, alarm panels and telecom racks
- Nominal voltage
- 12V
- Capacity, 20-hour rate
- 3.2Ah
- Dimensions (mm)
- 134×67×65.5
- Battery technology
- AGM
Shipping and lead times
- Mainland Spain1-2 working days · order before 17:00Free
- Express «14 horas»Next day before 16:00 · order before 17:30By weight
- Balearic Islands1-3 working daysBy weight
- Portugal3-4 working daysBy weight
- Europe: FR, IT, DE, BE, NL1-5 working daysBy weight
Canary Islands, Ceuta and Melilla: ask us.
Payment: Bank transferCash on delivery (+4 %, min. €4)
EU businesses with a VAT number: buy without VAT.
Quick answer: The battery on this page is the Fulbat FP12-3.2FR, aimed at UPS and standby systems. Nominal voltage is 12V, the same as most equipment of this kind.
Measurements, ratings and codes
Installation and maintenance tips
Hospitals rely on standby batteries for critical equipment. Check whether the UPS allows hot-swapping before pulling batteries out. Batteries left in service too long often fail without warning.
Fulbat FP12-3.2FR for UPS and standby systems
Rated 3.2Ah 12V, the Fulbat FP12-3.2FR serves UPS and standby systems. Terminals of the T1 type should match the spade connectors in your equipment. The Fulbat FP12-3.2FR page at baterias.online lists the figures to check before the swap.
At 3.2Ah, it is one of the compact options for UPS and standby systems.
Frequently asked questions
What size is the Fulbat FP12-3.2FR and how much does it weigh?
Length, width and height are 134 × 67 × 65.5 mm, and the weight is 1.35 kg. Compare with the space available, including clearance above the posts.
Which voltage does the Fulbat FP12-3.2FR run at?
Nominal voltage is 12V and capacity 3.2Ah. Wiring two in series doubles the voltage, while parallel wiring doubles the capacity.
How should I charge a battery like this?
Most smart chargers have a mode for AGM. Select it before charging; an unsuitable programme can shorten battery life.
What kind of terminals are fitted to the Fulbat FP12-3.2FR?
It is supplied with T1 terminals. Make sure your existing cables or plugs fit them.
Five checks for a perfect fit
- ✓ Terminal type: T1. Make sure your cable clamps or connectors suit it before fitting.
- ✓ This reference uses AGM. If your current battery has a different technology printed on it, find out why before switching.
- ✓ Measure the space available: the case takes up 134 × 67 × 65.5 mm, and a few millimetres too many can stop the hold-down from closing.
Explore more
Codes matching and measurements agreeing? The Fulbat FP12-3.2FR can go straight into your basket at baterias.online. Recycling the old battery is easy at most tips and garages.
About the technology: AGM
Each AGM cell is packed so tightly that the plates barely move, even on a bumpy road. AGM suits UPS and standby systems where a maintenance-free battery makes life easier. Check the charging voltage limit printed on an AGM label.
-
Brand
-
ReferenceBON-FULBAT-FP12-3.2FR
-
MPNFP12-3.2FR
Specifications
| Brand | Fulbat |
|---|---|
| Product line | FULBAT FP General Purpose |
| Used for | UPS and standby systems |
| Battery technology | AGM |
| Nominal voltage | 12V |
| Capacity, 20-hour rate | 3.2Ah |
| Length | 134 mm |
| Width | 67 mm |
| Height | 65.5 mm |
| Weight | 1.35 kg |
| Layout code | 3 |
| Terminals | T1 |
Documents
4 other products in the same category
- 12V
- 8Ah
- Dimensions: 151×65×100 mm
Viewed products
- 12V
- 190Ah
- Dimensions: 530×209×219 mm
- 12V
- 100Ah
- 830A
- Dimensions: 353×175×190 mm