- 12V
- 14Ah
- Dimensions: 151×98×100 mm
Fulbat
Ref. BON-FULBAT-FP12-9 Fulbat FP12-9: sealed standby cell for emergency power 9Ah 12V
- Nominal voltage
- 12V
- Capacity, 20-hour rate
- 9Ah
- Dimensions (mm)
- 151×65×99.5
- Battery technology
- AGM
Shipping and lead times
- Mainland Spain1-2 working days · order before 17:00Free
- Express «14 horas»Next day before 16:00 · order before 17:30By weight
- Balearic Islands1-3 working daysBy weight
- Portugal3-4 working daysBy weight
- Europe: FR, IT, DE, BE, NL1-5 working daysBy weight
Canary Islands, Ceuta and Melilla: ask us.
Payment: Bank transferCash on delivery (+4 %, min. €4)
EU businesses with a VAT number: buy without VAT.
Quick answer: In a nutshell: Fulbat FP12-9, a battery for UPS and standby systems, rated 9Ah 12V. Size and polarity decide most swaps, and both are listed on this page.
Practical advice for UPS and standby systems
Hospitals rely on standby batteries for critical equipment. Take old batteries to an authorised recycling point and tape over the terminals. Swollen cases in a UPS are a sign of overcharging or old age.
Technical figures at a glance
Care tips for AGM batteries
Tightly packed plates and mats give glass-mat batteries a sturdy inner structure. Glass-mat batteries recover well after a deep discharge compared with flooded ones. A battery tester gives a clearer picture of AGM health than a voltmeter.
Batteries with the same format
Cannot find the Fulbat FP12-9 you want? These share the same size and terminal layout.
Fulbat FPH12-35WFulbat FP12-7.2FR
Questions and answers
Is the Fulbat FP12-9 a heavy battery to fit?
2.52 kg is the listed weight. For larger batteries, a second pair of hands makes fitting safer.
Can I keep the Fulbat FP12-9 on a shelf before fitting?
Keep it upright somewhere cool and dry, and charge it before fitting if it has been stored for a while.
Will the Fulbat FP12-9 fit my battery space?
At 151 × 65 × 99.5 mm and 2.52 kg, it needs a tray of that size and a careful lift.
Why choose the Fulbat FP12-9
Rated 9Ah 12V, the Fulbat FP12-9 serves UPS and standby systems. Terminal type T2 needs to match the connectors. Entering the case code at baterias.online brings up the right block.
9Ah puts it squarely in the middle of the range for UPS and standby systems.
Explore more
Codes matching and measurements agreeing? The Fulbat FP12-9 can go straight into your basket at baterias.online. Have a spanner and a wire brush ready on the day.
Will the Fulbat FP12-9 fit?
- ✓ Photograph your old terminals and compare with T2.
- ✓ Chemistry: AGM. Some vehicles and chargers are programmed for a specific type, so check before swapping.
- ✓ Make room for 151 × 65 × 99.5 mm, including clearance above the posts.
-
Brand
-
ReferenceBON-FULBAT-FP12-9
-
MPNFP12-9
Specifications
| Brand | Fulbat |
|---|---|
| Product line | FULBAT FP General Purpose |
| Used for | UPS and standby systems |
| Battery technology | AGM |
| Nominal voltage | 12V |
| Capacity, 20-hour rate | 9Ah |
| Length | 151 mm |
| Width | 65 mm |
| Height | 99.5 mm |
| Weight | 2.52 kg |
| Layout code | 4 |
| Terminals | T2 |