Fulbat
Ref. BON-FULBAT-FP6-3.2 Fulbat FP6-3.2 | keeps alarms, servers and exit lights running | 3.2Ah 6V
- Nominal voltage
- 6V
- Capacity, 20-hour rate
- 3.2Ah
- Dimensions (mm)
- 134×34×66
- Battery technology
- AGM
Shipping and lead times
- Mainland Spain1-2 working days · order before 17:00Free
- Express «14 horas»Next day before 16:00 · order before 17:30By weight
- Balearic Islands1-3 working daysBy weight
- Portugal3-4 working daysBy weight
- Europe: FR, IT, DE, BE, NL1-5 working daysBy weight
Canary Islands, Ceuta and Melilla: ask us.
Payment: Bank transferCash on delivery (+4 %, min. €4)
EU businesses with a VAT number: buy without VAT.
Summary: Battery Fulbat FP6-3.2 at a glance: 3.2Ah 6V, intended for UPS and standby systems. Check the terminal side, as this one has the positive on the left-hand side.
Fulbat FP6-3.2 data sheet
| Manufacturer | Fulbat |
| Reference | FP6-3.2 |
| Series | FULBAT FP General Purpose |
| Used for | UPS and standby systems |
| Volts | 6V |
| Capacity, 20-hour rate (C20) | 3.2Ah |
| Chemistry | AGM |
| Dimensions (L × W × H) | 134 × 34 × 66 mm |
| Battery weight | 0.67 kg |
| Polarity | positive on the left-hand side |
| Connectors | T1 |
Fulbat FP6-3.2 in everyday use
Gate motors and access systems rely on backup batteries when the mains drops. Disconnect the load before working on a UPS without hot-swap. Mixing old and new batteries in one UPS cuts runtime and harms the new blocks.
About the Fulbat FP6-3.2
Server cabinets, security panels and exit lights often rely on a Fulbat FP6-3.2. Whether a standby block fits comes down to four things, all listed below: volts, amp-hours, size and connector style. The Fulbat FP6-3.2 page at baterias.online lists the figures to check before the swap.
3.2Ah makes it a smaller battery, good for light electrical loads. 0.67 kg makes it one of the lighter options for its capacity.
Questions buyers ask about the Fulbat FP6-3.2
How big and heavy is this Fulbat battery?
At 134 × 34 × 66 mm, measure the tray or compartment carefully. Plan the lift too: 0.67 kg is heavier than it looks.
Is the Fulbat FP6-3.2 suitable for a 6V system?
It is a 6V battery with a capacity of 3.2Ah. In banks of several units, connect only identical batteries bought at the same time.
Is the plus post on the correct side for my vehicle?
Polarity: positive on the left-hand side. Face the long side with the posts nearest you to compare.
Five checks for a perfect fit
- ✓ Technology to match: AGM. Moving to a different chemistry may need settings changed in your system.
- ✓ Measure the space available: the case takes up 134 × 34 × 66 mm, and a few millimetres too many can stop the hold-down from closing.
- ✓ Orientation matters: positive on the left-hand side on this model. Stand facing the long side with the terminals nearest you to compare.
More options
Finished comparing? Placing your order online takes a couple of minutes. Measuring the space before ordering avoids a battery that will not sit flat.
How AGM batteries work and how to look after them
Gas produced during charging recombines inside an AGM battery, so it loses almost no water. Cold starts are easier with AGM thanks to strong current delivery. Do not mix AGM and flooded batteries in one bank.
-
Brand
-
ReferenceBON-FULBAT-FP6-3.2
-
MPNFP6-3.2
Specifications
| Brand | Fulbat |
|---|---|
| Product line | FULBAT FP General Purpose |
| Used for | UPS and standby systems |
| Battery technology | AGM |
| Nominal voltage | 6V |
| Capacity, 20-hour rate | 3.2Ah |
| Length | 134 mm |
| Width | 34 mm |
| Height | 66 mm |
| Weight | 0.67 kg |
| Terminal polarity | Positive on the left-hand side |
| Terminals | T1 |
Documents
4 other products in the same category
- 6V
- 4.5Ah
- Dimensions: 70×47×106 mm
Viewed products
- 12V
- 229Ah
- Dimensions: 380×176×373 mm
- 12V
- 7Ah
- 380A
- Dimensions: 175×90×130 mm
- 12V
- 77Ah
- Dimensions: 276×171×236 mm
- 12V
- 100Ah
- 620A
- Dimensions: 306.5×168.5×215 mm