At a glance: Drivers and owners of traction and industrial equipment know this one as the Leoch LDC6-224-GC2. Terminals are of the T11(M8) type, so make sure your clamps suit them.
About the Leoch LDC6-224-GC2
Pallet trucks, scissor lifts and floor cleaners often depend on a Leoch LDC6-224-GC2. Machines often use several blocks in series. The model code is all the search at baterias.online needs.
Expect everyday performance from 224Ah in traction and industrial equipment.
6VVolts
224AhCapacity, 20-hour rate (C20)
30.5 kgWeight
Five checks for a perfect fit
- ✓ Technology to match: lead-carbon. Moving to a different chemistry may need settings changed in your system.
- ✓ Tape measure time: 260 × 180 × 253 mm is the footprint and height of this case. Leave a little clearance for the clamp and the cable lugs.
- ✓ Do not go far below your old battery's capacity; this one has 224Ah.
Specifications table
MakeLeoch
Model codeLDC6-224-GC2
Product lineLEOCH Deep Cycle LDC Series
Used fortraction and industrial equipment
Volts6V
Capacity, 20-hour rate (C20)224Ah
Battery technologyLead-carbon
Outer measurements260 × 180 × 253 mm
Weight30.5 kg
TerminalsT11(M8)
Answers before you buy
How do I check compatibility quickly?
Hold your old label up to LDC6-224-GC2. Same code plus same size and terminal side means a direct swap.
How long does ordering take at baterias.online?
Yes. Put it in your cart from this page and finish checkout online.
Which code identifies my existing battery?
Check the owner's manual for the original battery, or measure the old one and note its terminal layout and ratings. Then compare with models on baterias.online.
lead-carbon: how it works
Carbon improves conductivity on the negative plate. Existing lead-acid chargers usually work with lead-carbon. Respect the maximum charge current.
Explore more
Got the old battery's label in front of you? Compare it once more, then order online at baterias.online. Measuring the space before ordering avoids a battery that will not sit flat.
Leoch LDC6-224-GC2 in everyday use
Scissor lifts on a building site may sit idle for days, then work flat out. Charge fully before storing a machine. A machine that no longer completes a shift usually has worn batteries.
