In short: The battery on this page is the Long WP13-6, aimed at UPS and standby systems. Get the size and terminal side right and you are most of the way there.
Is the Long WP13-6 right for you?
Silent and ready for years: that is the life of the Long WP13-6, rated 13Ah 6V. At 2.24 kg, swapping it takes one pair of hands. Every standby battery at baterias.online lists its terminal type.
13Ah sits in the comfortable middle for UPS and standby systems. 2.24 kg makes it one of the lighter options for its capacity.
6VNominal voltage
13AhCapacity, 20-hour rate (C20)
2.24 kgWeight
Quick compatibility checklist
- ✓ Tape measure time: 108 × 70 × 140 mm is the footprint and height of this case. Leave a little clearance for the clamp and the cable lugs.
- ✓ Do not go far below your old battery's capacity; this one has 13Ah.
- ✓ The technology is AGM. Keep the same type as the original, and confirm your charger offers a matching profile.
Long WP13-6 data sheet
ManufacturerLong
Model codeWP13-6
SeriesWP Series
SuitsUPS and standby systems
Nominal voltage6V
Capacity, 20-hour rate (C20)13Ah
Battery technologyAGM
Outer measurements108 × 70 × 140 mm
Weight2.24 kg
Questions buyers ask about the Long WP13-6
What does the Long WP13-6 weigh in kilograms?
At 2.24 kg, one person can usually manage with care; bigger batteries are easier with two.
Can I keep the Long WP13-6 on a shelf before fitting?
Yes, but all batteries self-discharge slowly. Check the voltage every few months and recharge if needed.
Care tips for AGM batteries
Glass-mat batteries are sealed, with small valves that only open if pressure builds up. Cars with automatic engine stop love AGM, since it copes with constant partial discharge. Keep AGM batteries away from sustained heat, which shortens their life.
Related products and ranges
Got the old battery's label in front of you? Compare it once more, then order online at baterias.online. Have a spanner and a wire brush ready on the day.
Practical advice for UPS and standby systems
A remote pumping station depends on backup power during outages. Photograph the terminal type and connector positions before removing the old blocks. Heat ages standby batteries faster than anything else.
