In short: One code, one battery: Ritar FT12-105, 105Ah 12V, for UPS and standby systems. Weight is 32.5 kg, worth knowing before you lift it out of the tray.
12VVoltage
105AhAmp-hours at C10
32.5 kgWeighs
Why choose the Ritar FT12-105
Here is the Ritar FT12-105, a battery for UPS and standby systems. Measuring 508 × 111 × 236 mm, it needs the same space as the original block. Buying batteries online by exact reference avoids mixing makes in one UPS string.
Big reserve: 105Ah is high for UPS and standby systems.
Ritar FT12-105: dimensions and ratings
Fitting and everyday care
Server rooms that run warm age standby batteries quickly. Disconnect the load before working on a UPS without hot-swap. Batteries left in service too long often fail without warning.
Care tips for AGM batteries
Oxygen formed at one plate travels through the mat and recombines at the other. Glass-mat batteries recover well after a deep discharge compared with flooded ones. Replace an AGM battery whose case has bulged.
Quick compatibility checklist
- ✓ Make sure your clamps fit M8 posts or tabs.
- ✓ Technology to match: AGM. Moving to a different chemistry may need settings changed in your system.
- ✓ Grab a tape measure: 508 × 111 × 236 mm is what this case needs.
Common questions about the Ritar FT12-105
Is the Ritar FT12-105 part of a wider range?
It belongs to RITAR FT. If you need a different size with the same construction, look within that range.
Will the Ritar FT12-105 replace my old battery?
Read the part number on your existing battery and look up the original fitment in the manual. If either points to FT12-105, or the figures agree, it will work.
Is it easy to buy this battery online?
Yes. Open this page, check the figures, add it to your basket and finish checkout in a few steps.
Related products and ranges
Ordering online at baterias.online is the quick part once the checks are done. Once the battery is in, keep the old one for recycling at an authorised point.
