Ritar RL2250: sealed standby cell for emergency power 250Ah 2V

In short: Here is the Ritar RL2250 in one line: UPS and standby systems, 250Ah 2V. The code RL2250 on your old label is the quickest confirmation.

Ritar RL2250 data sheet

Using it day to day: practical tips

An alarm panel beeping at three in the morning usually means its battery is low. Note the fitting date on the case. Plan on renewing standby blocks on a regular cycle rather than waiting for trouble.

Batteries with the same format

If you prefer another make, these fit the same space with the same terminal side.

Long MSK200Ritar RL2200

Buying the Ritar RL2250 online

Spotted Ritar RL2250 printed on the case of a standby battery? That code leads here. Ratings of 250Ah 2V should match the block you are replacing. Searching by exact code keeps a UPS string matched.

Rated 250Ah, it offers more capacity than the typical battery for UPS and standby systems. Lifting it in is easy at 13.8 kg, light for a battery of this capacity.

Questions buyers ask about the Ritar RL2250

Check before ordering

• ✓ Built with AGM technology: if your vehicle or system was set up for another chemistry, check the charging settings first.
• ✓ Size check: 170 × 106 × 342 mm. A battery even slightly taller than the original can touch the bonnet or the seat base.
• ✓ Consider extra loads such as a tow bar when comparing 250Ah.

See also

Ordering online at baterias.online is the quick part once the checks are done. A minute spent comparing the label of your old battery avoids most mistakes.

• Browse the full range for UPS and standby systems
• See every Ritar reference

Care tips for AGM batteries

Many glass-mat designs tolerate sideways mounting, as long as the maker says so. Backup systems rely on AGM because it can wait, fully charged, for years without fuss. A battery tester gives a clearer picture of AGM health than a voltmeter.