12VVolts
185AhCapacity (C20)
1100ACold cranking current (EN)
At a glance: Put simply: Exide EE1853, rated 185Ah 12V 1100A, sold for trucks and farm machinery. Weight is 46.4 kg, worth knowing before you lift it out of the tray.
Specifications table
MakeExide
Part numberEE1853
RangeEXIDE STRONG PRO
Applicationtrucks and farm machinery
Volts12V
Capacity (C20)185Ah
Cold cranking current (EN)1100A
Battery technologyEFB
Outer measurements513 × 223 × 223 mm
Weighs46.4 kg
Layout3
Barcode3661024035255
Practical advice for trucks and farm machinery
Harvest week, the combine has stood since last year and the starter barely turns. Clean and tighten the chassis earth strap whenever a new battery goes in. A machine that only starts after a jump each morning needs new batteries.
Other options with identical dimensions
Same format, different makers: these alternatives match the Exide EE1853 in size and layout.
Deta DE1853Deta DF1853Exide EF1853Fulmen FE1853Fulmen FF1853
Why choose the Exide EE1853
Big engines and long days: that is the world of the Exide EE1853, rated 185Ah 12V 1100A. Weighing 46.4 kg, it is a two-handed lift at least. Batteries online for commercial vehicles are easiest to order by exact code.
Need extra reserve? 185Ah puts this one near the top for trucks and farm machinery.
Answers before you buy
Can you give me the size and weight of this battery?
Overall it is 513 × 223 × 223 mm (L × W × H) and tips the scales at 46.4 kg. Weight is a good clue to how much active material is inside.
How much capacity and starting power does the Exide EE1853 offer?
It stores 185Ah and delivers 1100A of cold cranking current under the EN test. Choose a battery that matches or slightly exceeds the figures of the original.
Make sure it fits your vehicle or equipment
- ✓ Outside dimensions are 513 × 223 × 223 mm. Run a tape measure over your tray or compartment, including the height under the bonnet or lid.
- ✓ The capacity rating, 185Ah, should suit the consumers you run. Lots of electrical equipment calls for the higher end.
- ✓ Starting power: 1100A to the EN standard. Match or beat the figure on your current label.
See also
Happy with the fit? Ordering the Exide EE1853 at baterias.online is quick. Note the fitting date somewhere you will find it again.
The EFB technology explained
Denser plate paste helps an enhanced flooded battery survive repeated starts. EFB works well in moderate climates and hot engine bays. Keep the vent path of an EFB unobstructed.
