- 12V
- 145Ah
- 900A
- Dimensions: 513×189×223 mm
Exide
Ref. BON-EXIDE-EF2353 Exide EF2353 – for HGVs, buses, combines and construction plant – 235Ah 12V 1300A
- Nominal voltage
- 12V
- Capacity, 20-hour rate
- 235Ah
- Cold cranking current (EN)
- 1300A
- Dimensions (mm)
- 518×274×240
- Battery technology
- Lead-acid
Free shipping to mainland Spain
Shipping and lead times
- Mainland Spain1-2 working days · order before 17:00Free
- Express «14 horas»Next day before 16:00 · order before 17:30
- Balearic Islands1-3 working days
- Portugal3-4 working days
- Europe: FR, IT, DE, BE, NL1-5 working days
No shipping to the Canary Islands, Ceuta or Melilla.
Payment: Bank transferCash on delivery (+4 %, min. €4)
EU businesses with a VAT number: buy without VAT.
Exide EF2353 · 235Ah 12V 1300A. Size and polarity in the table.
- Volts: 12V
- Amp-hours at C20: 235Ah
- Starting power (EN): 1300A
- Dimensions (L × W × H): 518 × 274 × 240 mm
- Technology: Lead-acid
Summary: Built for trucks and farm machinery, the Exide EF2353 carries the rating 235Ah 12V 1300A. Size and polarity decide most swaps, and both are listed on this page.
Measurements, ratings and codes
Practical advice for trucks and farm machinery
Tail lifts on delivery lorries pull heavy current dozens of times a day. Disconnect the series link before charging the two batteries separately at 12 volts. A cracked case from vibration means the battery should come out at once.
Same size and layout
Same format, different makers: these alternatives match the Exide EF2353 in size and layout.
Deta DE2353Deta DF2353Deta DJ2353Exide EE2353Exide EF2353+
Why choose the Exide EF2353
Fleets of trucks and farm machinery often standardise on the Exide EF2353. Heavy batteries need a cradle and clamp that grip the base ledge properly. Comparing batteries online helps keep every lorry in the depot on the same part number.
Big reserve: 235Ah is high for trucks and farm machinery.
Answers before you buy
What is the cold cranking rating of the Exide EF2353?
Under the EN test it delivers 1300A.
How should I store the Exide EF2353 if I don't fit it immediately?
Yes. Store it standing up in a cool room and top it up after a few months of waiting.
Make sure it fits your vehicle or equipment
- ✓ Rated 235Ah: check that the charger or alternator in your system can refill a battery of that capacity in reasonable time.
- ✓ EN cranking amps of 1300A. If you are unsure of your requirement, the vehicle handbook usually states it.
- ✓ Set your charger to lead-acid before the first charge.
More options
Finished comparing? Placing your order online takes a couple of minutes. Recycling the old battery is easy at most tips and garages.
Care tips for lead-acid batteries
Plates made of lead and lead dioxide react with the acid. Lead-acid suits trucks and farm machinery where simplicity and value count. Clean white deposits off the terminals with a little bicarbonate solution.
Specifications
| Brand | Exide |
|---|---|
| Product line | EXIDE Power Pro (HDX) |
| Used for | Trucks and farm machinery |
| Battery technology | Lead-acid |
| Nominal voltage | 12V |
| Capacity, 20-hour rate | 235Ah |
| Cold cranking current (EN) | 1300A |
| Length | 518 mm |
| Width | 274 mm |
| Height | 240 mm |
| Weight | 56.3 kg |
| Layout code | 3 |
Documents
4 other products in the same category
- 12V
- 210Ah
- 800A
- Dimensions: 518×274×240 mm
- 12V
- 110Ah
- 680A
- Dimensions: 347×173×234 mm
- 12V
- 110Ah
- 760A
- Dimensions: 514×175×210 mm
Viewed products
- 12V
- 95Ah
- 850A
- Dimensions: 353×175×190 mm
- 12V
- 225Ah
- 1450A
- Dimensions: 517×274×243 mm
- 12V
- 110Ah
- 680A
- Dimensions: 349×175×236 mm
- 12V
- 130Ah
- 680A
- Dimensions: 514×218×208 mm