Exide ET1600 · 230Ah 12V 1100A · leisure power for boats, caravans and campervans
Replacement Exide ET1600 for boats and motorhomes. All published figures are listed below.
- Nominal voltage: 12V
- Capacity, 20-hour rate (C20): 230Ah
- Cold cranking current (EN): 1100A
- Size L × W × H: 518 × 274 × 240 mm
- Battery technology: Lead-acid
Quick answer: Here is the Exide ET1600 in one line: boats and motorhomes, 230Ah 12V 1100A. Every figure that decides the fit is in the table below.
Installation and maintenance tips
Three nights at anchor with the fridge running show quickly what a battery bank can really do. Use the same cable length for each battery in a parallel bank. A bank that cannot get through one night with the fridge running needs replacing.
Exide ET1600: dimensions and ratings
lead-acid: how it works
Liquid acid in a flooded battery moves freely. Tractors and trucks use robust flooded batteries. Keep flooded batteries upright.
Other options with identical dimensions
Cannot find the Exide ET1600 you want? These share the same size and terminal layout.
Varta LFD230Q-Battery 12SEM-225Exide EP2100Kronobat DP-240-EFBVarta LED240
Your questions answered
What is the watt-hour rating?
Roughly 1600 Wh. Remember that lead-based batteries should not be discharged completely, so plan with a margin.
Is this battery easy to lift?
64.8 kg is the listed weight. For larger batteries, a second pair of hands makes fitting safer.
What is the cold cranking rating of the Exide ET1600?
With 1100A, it suits vehicles whose maker specifies that value or less. Cold climates benefit from extra.
Is the Exide ET1600 right for you?
Many skippers and caravanners find the Exide ET1600 code on a battery box label, faded but readable. Weighing 64.8 kg, it is worth planning how to lift it into a cramped locker. Comparing capacity and weight on screen beats guessing in a chandlery.
At 230Ah, there is plenty in reserve compared with most batteries for boats and motorhomes.
See also
Everything on baterias.online is filed by brand and reference, so ordering the Exide ET1600 is straightforward. If the terminal side or size differ, browse the alternatives before ordering.
Before you order: a quick checklist
- ✓ The capacity rating, 230Ah, should suit the consumers you run. Lots of electrical equipment calls for the higher end.
- ✓ Check the EN figure on your old label against 1100A.
- ✓ Chemistry: lead-acid. Some vehicles and chargers are programmed for a specific type, so check before swapping.
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent