Exide AGM12-7.5: motorbike and ATV starter battery 8Ah 12V 120A
Exide AGM12-7.5 · a replacement for motorcycles and quads. Weight 3.1 kg.
- Volts: 12V
- Capacity (C20): 8Ah
- Starting power (EN): 120A
- Dimensions (L × W × H): 150 × 90 × 105 mm
- Technology: AGM
In short: Drivers and owners of motorcycles and quads know this one as the Exide AGM12-7.5. Nominal voltage is 12V, the same as most equipment of this kind.
Getting the best from the Exide AGM12-7.5
Couriers on scooters start and stop all day long. Lithium versions only like lithium charging programmes, so check yours before switching. Bump starting regularly wears the clutch and hides a bad battery.
Exide AGM12-7.5: dimensions and ratings
About the technology: AGM
Glass-mat batteries are sealed, with small valves that only open if pressure builds up. Glass-mat batteries recover well after a deep discharge compared with flooded ones. Old-fashioned chargers without automatic cut-off are a poor match for glass-mat batteries.
Batteries with the same format
Listed below: batteries with the same case and polarity as the Exide AGM12-7.5.
Exide ETX9-BSVarta YTX9-BSExide ET12A-BSVarta 510909015Fulbat FT12A-BS
Questions buyers ask about the Exide AGM12-7.5
What kind of terminals are fitted to the Exide AGM12-7.5?
The terminals are M12. If your equipment uses a different connector, you will need the appropriate adapter or lug.
Are there other sizes in the same series?
This reference sits within EXIDE MOTORCYCLE AGM 12V. Browse the brand page to see the neighbouring sizes of the same range.
Exide AGM12-7.5 for motorcycles and quads
Spotted Exide AGM12-7.5 on your old battery? That code is the one to use. Swapping a battery like this at the kerbside takes ten minutes with basic tools. Once the code and size match, the order at baterias.online takes a couple of minutes.
Nothing unusual about 8Ah: a standard capacity for motorcycles and quads.
Related products and ranges
Prefer to compare first? The links below lead to other options for motorcycles and quads on baterias.online. Checking the data first saves the hassle of a wrong order.
Check before ordering
- ✓ With 8Ah of capacity, hold it up to the figure on the outgoing unit or in your equipment manual.
- ✓ Starting current 120A: look for the EN value on your old label and choose this reference only if it is equal or higher.
- ✓ It comes with M12 terminals, so check that your leads, lugs or plugs can attach to them without adapters.
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent