Exide EB4L-B: motorbike and ATV starter battery 4Ah 12V 50A
Replacement Exide EB4L-B for motorcycles and quads. Weight 1.6 kg.
- Voltage: 12V
- Amp-hours at C20: 4Ah
- Cold cranking amps: 50A
- Outer measurements: 120 × 70 × 95 mm
- Technology: Lead-acid
Quick answer: Here is the Exide EB4L-B in one line: motorcycles and quads, 4Ah 12V 50A. Compare the code on your old battery with EB4L-B before ordering.
Is the Exide EB4L-B right for you?
Riding a bike that takes a Exide EB4L-B? This is the page. The box measures 120 × 70 × 95 mm, and a few millimetres decide whether the seat closes. Searching batteries online by exact code beats squinting at photos of near-identical boxes.
4Ah makes it a smaller battery, good for light electrical loads.
Five checks for a perfect fit
- ✓ Photograph your old terminals and compare with M04.
- ✓ This reference uses lead-acid. If your current battery has a different technology printed on it, find out why before switching.
- ✓ Tape measure time: 120 × 70 × 95 mm is the footprint and height of this case. Leave a little clearance for the clamp and the cable lugs.
Exide EB4L-B: dimensions and ratings
Answers before you buy
How strong is this battery when starting?
Under the EN test it delivers 50A.
Does this battery match my current one physically?
It measures 120 × 70 × 95 mm with positive on the right-hand side. If your current battery has the same size and layout, it will slot in and the leads will reach.
lead-acid: how it works
A classic lead-acid battery has lead plates sitting in liquid sulphuric acid. Flooded batteries handle hot engine bays well. Clean terminal deposits with bicarbonate solution.
More options
Keep the code EB4L-B handy for next time: it makes reordering at baterias.online quick. A tidy, clean tray gives the new battery a better start.
Fitting and everyday care
Classic bikes with kick-start still rely on the battery for lights and ignition. Connect the positive lead first, then the negative. A cracked case from a fall means immediate replacement.
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent