Q-Battery 12LS-1.2 | keeps alarms, servers and exit lights running | 1.2Ah 12V
Made for UPS and standby systems: Q-Battery 12LS-1.2, 1.2Ah 12V. Match the terminal side.
- Volts: 12V
- Capacity, 20-hour rate (C20): 1.2Ah
- Size L × W × H: 97 × 43 × 52 mm
- Technology: AGM
At a glance: What you are looking at: the Q-Battery 12LS-1.2, a 1.2Ah 12V battery for UPS and standby systems. Measure twice, order once: dimensions decide most swaps.
Measurements, ratings and codes
Fitting and everyday care
Server rooms that run warm age standby batteries quickly. Write the installation date on the case so the next change can be planned. Emergency luminaires that go dark early during a drill usually need fresh cells.
Is the Q-Battery 12LS-1.2 right for you?
Made for UPS and standby systems, the Q-Battery 12LS-1.2 waits on float for years and takes over in an instant. Terminals of the F1 (4,75mm) type should match the spade connectors in your equipment. Search Q-Battery 12LS-1.2 and you reach this page directly.
A modest 1.2Ah keeps size and weight down for tight spaces.
Your questions answered
Does a battery lose charge on the shelf?
Yes, but all batteries self-discharge slowly. Check the voltage every few months and recharge if needed.
How large and heavy is this battery?
At 97 × 43 × 52 mm and 0.54 kg, it needs a tray of that size and a careful lift.
Which voltage does the Q-Battery 12LS-1.2 run at?
Voltage is 12V, capacity 1.2Ah. Check your equipment runs on the same voltage before ordering.
Make sure it fits your vehicle or equipment
- ✓ This reference uses AGM. If your current battery has a different technology printed on it, find out why before switching.
- ✓ Check 97 × 43 × 52 mm against the tray, not just the old battery.
- ✓ Capacity is 1.2Ah. Aim for the same figure as your old battery or slightly above, never much lower.
Explore more
Finished comparing? Placing your order online takes a couple of minutes. Checking the data first saves the hassle of a wrong order.
What AGM means for you
Nothing sloshes around in a glass-mat battery, because every drop of acid is held in the separators. Glass-mat batteries recover well after a deep discharge compared with flooded ones. Check the charging voltage limit printed on an AGM label.
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent