12VVoltage
17AhAmp-hours at C20
5.5 kgWeighs
Quick answer: Drivers and owners of UPS and standby systems know this one as the Q-Battery 12LSX-7 F1. Terminals are of the F13 (M5) type, so make sure your clamps suit them.
Q-Battery 12LSX-7 F1: dimensions and ratings
Installation and maintenance tips
Data centres replace whole strings of batteries on a schedule. Photograph the terminal type and connector positions before removing the old blocks. Alarm panels that keep reporting low battery need attention.
Alternatives that fit the same space
Other references from our catalogue with the same measurements and terminal position.
Long WPS17-12Q-Battery 12LS-17Long WP18-12NSHRLong WP18-12SHRLong WPL18-12SHR
Q-Battery 12LSX-7 F1: what it is and who it suits
Home alarm systems and garage door motors also use the Q-Battery 12LSX-7 F1. Ratings of 17Ah 12V should match the block you are replacing. Installers pick baterias.online because the specifications are laid out the same way for every block.
Most batteries for UPS and standby systems land close to 17Ah, and this one does too.
Common questions about the Q-Battery 12LSX-7 F1
Will the Q-Battery 12LSX-7 F1 fit my battery space?
The case measures 181 × 77 × 167 mm and the battery weighs 5.5 kg. Check both against your tray and the hold-down before ordering, and lift it with care.
Is the Q-Battery 12LSX-7 F1 suitable for a 12V system?
It is rated 12V and 17Ah. Check your equipment's voltage first: a mismatch can damage electronics or simply not work.
Quick compatibility checklist
- ✓ With 17Ah of capacity, hold it up to the figure on the outgoing unit or in your equipment manual.
- ✓ With F13 (M5) terminals, some installations need a different clamp or adapter. Check before fitting.
- ✓ As a AGM battery it needs matching charge settings in the alternator, charger or solar regulator.
More options
Keep the code 12LSX-7 F1 handy for next time: it makes reordering at baterias.online quick. Checking the terminal side takes ten seconds and saves a lot of bother.
The AGM technology explained
Tightly packed plates and mats give glass-mat batteries a sturdy inner structure. Glass-mat batteries recover well after a deep discharge compared with flooded ones. Check the charging voltage limit printed on an AGM label.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent