Tudor TG1102 – for HGVs, buses, combines and construction plant – 110Ah 12V 750A

In short: Put simply: Tudor TG1102, rated 110Ah 12V 750A, sold for trucks and farm machinery. Weight is 25.4 kg, worth knowing before you lift it out of the tray.

Buying the Tudor TG1102 online

Running a lorry, a tractor or a digger that takes a Tudor TG1102? Here it is. Cradle size, post type and cranking amps decide the fit, and all three are listed below. Typing the exact code at baterias.online keeps every vehicle on the same battery.

At 110Ah, it is one of the compact options for trucks and farm machinery. With 25.4 kg on the scales, it weighs less than many batteries of similar capacity.

Five checks for a perfect fit

• ✓ Make room for 349 × 175 × 235 mm, including clearance above the posts.
• ✓ Plus pole position: positive on the right-hand side. Mixing up orientation is the most common reason a battery of the right size will not connect.
• ✓ The capacity rating, 110Ah, should suit the consumers you run. Lots of electrical equipment calls for the higher end.

Specifications table

Common questions about the Tudor TG1102

How lead-acid batteries work and how to look after them

Six cells of about two volts each make up a typical 12-volt battery. Older cars without stop-start systems are happy with a standard lead-acid battery. Clean white deposits off the terminals with a little bicarbonate solution.

Same size and layout

Looking to compare? Each of these has the dimensions and polarity of the Tudor TG1102.

Deta DG1100Deta DG1102Deta DJ1100Deta DJ1102Exide EG1100

See also

Everything you need to order the Tudor TG1102 is on this page. If the terminal side or size differ, browse the alternatives before ordering.

• Browse the full range for trucks and farm machinery
• The complete Tudor range

Fitting and everyday care

Harvest week, the combine has stood since last year and the starter barely turns. Torque the terminal nuts to the maker's figure. Mud packed around terminals hides corrosion.