- 12V
- 110Ah
- 750A
- Dimensions: 349×175×235 mm
Exide
Ref. BON-EXIDE-EJ2353 Exide EJ2353: commercial and agricultural vehicle battery 235Ah 12V 1450A
- Nominal voltage
- 12V
- Capacity, 20-hour rate
- 235Ah
- Cold cranking current (EN)
- 1450A
- Dimensions (mm)
- 518×274×240
- Battery technology
- Lead-acid
Shipping and lead times
- Mainland Spain1-2 working days · order before 17:00Free
- Express «14 horas»Next day before 16:00 · order before 17:30
- Balearic Islands1-3 working days
- Portugal3-4 working days
- Europe: FR, IT, DE, BE, NL1-5 working days
No shipping to the Canary Islands, Ceuta or Melilla.
Payment: Bank transferCash on delivery (+4 %, min. €4)
EU businesses with a VAT number: buy without VAT.
The Exide EJ2353: a battery for trucks and farm machinery. All published figures are listed below.
- Nominal voltage: 12V
- Capacity, 20-hour rate (C20): 235Ah
- Cold cranking current (EN): 1450A
- Outer measurements: 518 × 274 × 240 mm
- Technology: Lead-acid
Quick answer: Battery Exide EJ2353 at a glance: 235Ah 12V 1450A, intended for trucks and farm machinery. Terminal position is the detail people most often forget.
Why choose the Exide EJ2353
Bus depots and haulage yards both keep the Exide EJ2353 on their parts lists. A cold-start rating of 1450A gives a frozen tractor on a February morning a real chance. A phone photo of the old label is enough to order the right replacement.
At 235Ah, there is plenty in reserve compared with most batteries for trucks and farm machinery.
Exide EJ2353: dimensions and ratings
Fitting and everyday care
Coaches with long stops and the heating on drain their batteries faster than drivers expect. Check the alternator output when replacing batteries on older trucks. A cracked case from vibration means the battery should come out at once.
How lead-acid batteries work and how to look after them
Each cell in a flooded battery produces about two volts. Conventional batteries deliver high current at a modest price. Clean terminal deposits with bicarbonate solution.
Will the Exide EJ2353 fit?
- ✓ Cold cranking 1450A: compare with your handbook's requirement.
- ✓ Sticking with lead-acid avoids surprises, unless your vehicle maker approves a change.
- ✓ Outside dimensions are 518 × 274 × 240 mm. Run a tape measure over your tray or compartment, including the height under the bonnet or lid.
Answers before you buy
How much weight should I expect to lift?
At 59.7 kg, it is manageable for one person with care. Keep it upright while moving it.
What cranking current does the Exide EJ2353 deliver?
It delivers 1450A. Diesels usually need more than petrol engines, so check your handbook.
Can I keep the Exide EJ2353 on a shelf before fitting?
Store it fully charged, away from heat and frost, and give it a refresh charge before installation.
How large and heavy is this battery?
At 518 × 274 × 240 mm, measure the tray or compartment carefully. Plan the lift too: 59.7 kg is heavier than it looks.
Alternatives that fit the same space
Cannot find the Exide EJ2353 you want? These share the same size and terminal layout.
Deta DE2353Deta DF2353Deta DJ2353Exide EE2353Exide EF2353
Explore more
When the numbers match, the Exide EJ2353 can be ordered online at baterias.online in a few minutes. A minute spent comparing the label of your old battery avoids most mistakes.
Specifications
| Brand | Exide |
|---|---|
| Product line | EXIDE PowerPRO Agricultura y Construccion |
| Used for | Trucks and farm machinery |
| Battery technology | Lead-acid |
| Nominal voltage | 12V |
| Capacity, 20-hour rate | 235Ah |
| Cold cranking current (EN) | 1450A |
| Length | 518 mm |
| Width | 274 mm |
| Height | 240 mm |
| Weight | 59.7 kg |
| Layout code | 3 |
Documents
4 other products in the same category
- 12V
- 125Ah
- 760A
- Dimensions: 349×175×285 mm
- 12V
- 180Ah
- 1000A
- Dimensions: 510×218×225 mm
- 12V
- 170Ah
- 950A
- Dimensions: 514×218×210 mm
Viewed products
- 12V
- 172Ah
- 1390A
- Dimensions: 513×223×223 mm