Fulbat FB10L-BP | two-wheelers, ATVs and personal watercraft | 11.6Ah 12V 165A

Fulbat FB10L-BP · a replacement for motorcycles and quads. Full data sheet below.

  • Voltage: 12V
  • Capacity (C20): 11.6Ah
  • Starting power (EN): 165A
  • Outer measurements: 135 × 90 × 145 mm
  • Battery technology: Lead-acid
Share

Notify me when available

Interested in this product? Drop us an email and we will let you know when it's available for order.

Quick answer: Spec sheet headline for the Fulbat FB10L-BP: 11.6Ah 12V 165A, made with motorcycles and quads in mind. Before anything else, measure the space: the case comes to 135 × 90 × 145 mm.

12VVoltage
11.6AhCapacity (C20)
165AStarting power (EN)

Fulbat FB10L-BP: what it is and who it suits

Spotted Fulbat FB10L-BP on your old battery? That code is the one to use. The figures read 11.6Ah 12V 165A, and those come straight from the maker. The Fulbat FB10L-BP page sets out the details before any panel comes off.

11.6Ah is right in the usual range for motorcycles and quads.

Specifications table

MakeFulbat
Model codeFB10L-BP
Product lineFULBAT Motorcycle DRY
Applicationmotorcycles and quads
Voltage12V
Capacity (C20)11.6Ah
Starting power (EN)165A
Battery technologyLead-acid
Outer measurements135 × 90 × 145 mm
Weight3.73 kg
Terminal polaritypositive on the right-hand side

Using it day to day: practical tips

A track-day bike sits for weeks between events. Wash any acid spills with plenty of water. A battery that runs down after a week parked needs attention.

Care tips for lead-acid batteries

Some lead-acid batteries have removable caps, others are sealed for life. Flooded batteries handle hot engine bays well. Clean terminal deposits with bicarbonate solution.

Make sure it fits your vehicle or equipment

  • ✓ This reference uses lead-acid. If your current battery has a different technology printed on it, find out why before switching.
  • ✓ Dimensions to compare: 135 × 90 × 145 mm. Do not forget the base ledge, which the hold-down clamp grips on many vehicles.
  • ✓ Terminal layout: positive on the right-hand side. If your original is the mirror image, choose another reference rather than stretching the leads.

Common questions about the Fulbat FB10L-BP

Can I connect several of these in series or parallel?

It is rated 12V and 11.6Ah. Check your equipment's voltage first: a mismatch can damage electronics or simply not work.

Which corner holds the positive post on the Fulbat FB10L-BP?

This battery has positive on the right-hand side. Compare with your old unit; if they differ, the cables may not reach.

How should I charge a battery like this?

Most smart chargers have a mode for lead-acid. Select it before charging; an unsuitable programme can shorten battery life.

Is the Fulbat FB10L-BP part of a wider range?

Yes: it is part of FULBAT Motorcycle DRY. Other members of that family use the same technology.

Alternatives that fit the same space

Other references from our catalogue with the same measurements and terminal position.

Fulbat FB10L-A2Fulbat FB10L-A2/B2 GELFulbat FB10L-B2Exide EB10L-A2Exide EB10L-B

Related products and ranges

Finished comparing? Placing your order online takes a couple of minutes. Have a spanner and a wire brush ready on the day.

  • Brand
  • Reference
    BON-FULBAT-FB10L-BP
  • MPN
    FB10L-BP

  • Brand
    Fulbat
  • Product line
    FULBAT Motorcycle DRY
  • Used for
    Motorcycles and quads
  • Battery technology
    Lead-acid
  • Nominal voltage
    12V
  • Capacity, 20-hour rate
    11.6Ah
  • Cold cranking current (EN)
    165A
  • Length
    135 mm
  • Width
    90 mm
  • Height
    145 mm
  • Weight
    3.73 kg
  • Terminal polarity
    Positive on the right-hand side
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)

Comments (0)

No customer reviews for the moment.

4 other products in the same category

Viewed products

Loading...
Back to top