Fulbat FB7L-B2 · 8.4Ah 12V 85A · for motorbikes, scooters and quads

In short: Battery Fulbat FB7L-B2 at a glance: 8.4Ah 12V 85A, intended for motorcycles and quads. Owners usually check three things first: size, terminal side and starting power.

Fulbat FB7L-B2 for motorcycles and quads

Riding a bike that takes a Fulbat FB7L-B2? This is the page. Built with lead-acid technology, it suits riders who want a battery to match their charging setup. Batteries online for bikes are best picked by the code on the old one.

8.4Ah sits in the comfortable middle for motorcycles and quads.

Before you order: a quick checklist

• ✓ EN cranking amps of 85A. If you are unsure of your requirement, the vehicle handbook usually states it.
• ✓ Technology to match: lead-acid. Moving to a different chemistry may need settings changed in your system.
• ✓ Size check: 135 × 75 × 133 mm. A battery even slightly taller than the original can touch the bonnet or the seat base.

Fulbat FB7L-B2: dimensions and ratings

Questions and answers

About the technology: lead-acid

Each cell in a flooded battery produces about two volts. Flooded traction batteries last years with regular watering. Hand old batteries in at an authorised recycling point.

Other options with identical dimensions

Listed below: batteries with the same case and polarity as the Fulbat FB7L-B2.

Exide EB7L-BExide 12N7-3BVarta YB7L-B

More options

When the numbers match, the Fulbat FB7L-B2 can be ordered online at baterias.online in a few minutes. Other Fulbat models are linked below if you need a different size from the same maker.

• More for motorcycles and quads
• See every Fulbat reference

Using it day to day: practical tips

Modern bikes with alarms and trackers drain a little current even when parked. Keep the seat lock and side panel screws in a tray during the swap. A battery that needs charging after every week parked is ready for replacement.