Fulbat FP12-4L · 4Ah 12V · backup battery for UPS, alarm panels and telecom racks

Looking for Fulbat FP12-4L? A 4Ah 12V battery for UPS and standby systems. Size and polarity in the table.

  • Volts: 12V
  • Amp-hours at C20: 4Ah
  • Size L × W × H: 195 × 47 × 76 mm
  • Battery technology: AGM
Share

Notify me when available

Interested in this product? Drop us an email and we will let you know when it's available for order.

12VVolts
4AhAmp-hours at C20
1.38 kgWeighs

In short: Drivers and owners of UPS and standby systems know this one as the Fulbat FP12-4L. Check the terminal side, as this one has the positive on the left-hand side.

Practical advice for UPS and standby systems

Gate motors and access systems rely on backup batteries when the mains drops. Take old batteries to an authorised recycling point and tape over the terminals. Emergency luminaires that go dark early during a drill usually need fresh cells.

Measurements, ratings and codes

ManufacturerFulbat
Model codeFP12-4L
Product lineFULBAT FP General Purpose
SuitsUPS and standby systems
Volts12V
Amp-hours at C204Ah
Battery technologyAGM
Size L × W × H195 × 47 × 76 mm
Weighs1.38 kg
Positive terminalpositive on the left-hand side
Terminal typeT1

Care tips for AGM batteries

Picture a sponge holding the acid: that is roughly how an AGM cell works. Alarm panels and UPS units are classic homes for small AGM blocks. Charge an AGM battery in a cool, ventilated place.

Common questions about the Fulbat FP12-4L

How are the terminals arranged?

This model is positive on the left-hand side. If your old battery is the mirror image, choose another reference.

Can I use my usual charger with this battery?

Look at the sticker on the battery you have now. If it also says AGM, this is a like-for-like choice. If not, check your vehicle or system can handle the change.

Which terminals does the Fulbat FP12-4L have?

It is supplied with T1 terminals. Make sure your existing cables or plugs fit them.

About the Fulbat FP12-4L

Office tech teams usually come looking for the Fulbat FP12-4L when the UPS starts beeping. Measuring 195 × 47 × 76 mm, it needs the same space as the original block. Batteries online for alarms and UPS are filed by maker and code.

A modest 4Ah keeps size and weight down for tight spaces.

See also

When the numbers match, the Fulbat FP12-4L can be ordered online at baterias.online in a few minutes. Writing the fitting date on the battery helps when planning the next replacement.

Before you order: a quick checklist

  • ✓ Check 195 × 47 × 76 mm against the tray, not just the old battery.
  • ✓ Plus pole position: positive on the left-hand side. Mixing up orientation is the most common reason a battery of the right size will not connect.
  • ✓ Stored energy reserve: 4Ah. Going much lower than your current battery can leave you short on cold mornings or long stops.

  • Brand
  • Reference
    BON-FULBAT-FP12-4L
  • MPN
    FP12-4L

  • Brand
    Fulbat
  • Product line
    FULBAT FP General Purpose
  • Used for
    UPS and standby systems
  • Battery technology
    AGM
  • Nominal voltage
    12V
  • Capacity, 20-hour rate
    4Ah
  • Length
    195 mm
  • Width
    47 mm
  • Height
    76 mm
  • Weight
    1.38 kg
  • Terminal polarity
    Positive on the left-hand side
  • Terminals
    T1

Datasheet FP12-4L

Datasheet Fulbat FP12-4L

Download (719.77KB)
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)

Comments (0)

No customer reviews for the moment.

4 other products in the same category

Viewed products

Loading...
Back to top