New
Out-of-Stock

Fulbat FP12-18, a battery for UPS units | baterias.online

Fulbat FP12-18 | keeps alarms, servers and exit lights running | 18Ah 12V

Fulbat

Looking for Fulbat FP12-18? A 18Ah 12V battery for UPS and standby systems. Match the terminal side.

Voltage: 12V
Capacity, 20-hour rate (C20): 18Ah
Size L × W × H: 181.5 × 76.5 × 167.5 mm
Chemistry: AGM

Notify me when available

Interested in this product? Drop us an email and we will let you know when it's available for order.

In short: Drivers and owners of UPS and standby systems know this one as the Fulbat FP12-18. Get the size and terminal side right and you are most of the way there.

Fulbat FP12-18 for UPS and standby systems

Here is the Fulbat FP12-18, a battery for UPS and standby systems. Built with AGM technology, it can sit sealed in a cabinet without upkeep. Comparing terminal types on screen avoids a wasted order.

With 18Ah, capacity is typical of batteries for UPS and standby systems.

12VVoltage

18AhCapacity, 20-hour rate (C20)

5.35 kgBattery weight

Before you order: a quick checklist

✓ Make room for 181.5 × 76.5 × 167.5 mm, including clearance above the posts.
✓ Capacity is 18Ah. Aim for the same figure as your old battery or slightly above, never much lower.
✓ With T12 terminals, some installations need a different clamp or adapter. Check before fitting.

Fulbat FP12-18 data sheet

MakeFulbat

ReferenceFP12-18

RangeFULBAT FP General Purpose

ApplicationUPS and standby systems

Voltage12V

Capacity, 20-hour rate (C20)18Ah

ChemistryAGM

Size L × W × H181.5 × 76.5 × 167.5 mm

Battery weight5.35 kg

Layout2

Terminal typeT12

Your questions answered

How do I find the right battery by its code?

Use a tape measure and the handbook: the factory fitment listed there tells you which code to search.

How much weight should I expect to lift?

The weight is 5.35 kg. Heavier batteries generally contain more lead and active material.

Can a battery be stored before use?

Store it fully charged, away from heat and frost, and give it a refresh charge before installation.

About the technology: AGM

Gas produced during charging recombines inside an AGM battery, so it loses almost no water. Many modern cars with brake energy recovery were designed around AGM from the start. Charge an AGM battery in a cool, ventilated place.

Same size and layout

Other references from our catalogue with the same measurements and terminal position.

Fulbat FP12-18FRFulbat FP12-20

More options

Prefer to compare first? The links below lead to other options for UPS and standby systems on baterias.online. Bookmark this page if you want the data sheet to hand while fitting.

Fitting and everyday care

Gate motors and access systems rely on backup batteries when the mains drops. Write the installation date on the case so the next change can be planned. After a few years on float, most sealed standby batteries are due for replacement.