Fulbat FP12-250: sealed standby cell for emergency power 260Ah 12V

In short: Spec sheet headline for the Fulbat FP12-250: 260Ah 12V, made with UPS and standby systems in mind. Measure twice, order once: dimensions decide most swaps.

Installation and maintenance tips

A small shop's UPS keeps the till running through brief cuts. Wear gloves when handling old batteries. A UPS that reports a failed battery test needs new batteries soon.

Specifications table

Care tips for AGM batteries

Oxygen formed at one plate travels through the mat and recombines at the other. Wheelchairs and scooters often use AGM for clean, sealed power. A full charge now and then helps an AGM battery that mostly works part-charged.

Frequently asked questions

Why choose the Fulbat FP12-250

If the maintenance log lists the Fulbat FP12-250, this page has the details for the swap. Ratings of 260Ah 12V should match the block you are replacing. Installers pick baterias.online because the specifications are laid out the same way for every block.

Need extra reserve? 260Ah puts this one near the top for UPS and standby systems.

See also

Prefer to order now and fit at the weekend? baterias.online makes that easy. A minute spent comparing the label of your old battery avoids most mistakes.

• Compare alternatives for UPS and standby systems
• The complete Fulbat range

Before you order: a quick checklist

• ✓ With T11 terminals, some installations need a different clamp or adapter. Check before fitting.
• ✓ Built with AGM technology: if your vehicle or system was set up for another chemistry, check the charging settings first.
• ✓ Size check: 522 × 268 × 226 mm. A battery even slightly taller than the original can touch the bonnet or the seat base.