Fulbat FP12-18FR · 18Ah 12V · backup battery for UPS, alarm panels and telecom racks

In short: What you are looking at: the Fulbat FP12-18FR, a 18Ah 12V battery for UPS and standby systems. Compare the code on your old battery with FP12-18FR before ordering.

Full specifications of the Fulbat FP12-18FR

Installation and maintenance tips

A power cut at the office is when everyone finds out whether the UPS batteries were up to the job. Keep UPS units and battery cabinets ventilated and away from radiators. Forgetting to note installation dates leads to batteries left in service far too long.

Batteries with the same format

Other references from our catalogue with the same measurements and terminal position.

Fulbat FP12-18Fulbat FP12-20

Fulbat FP12-18FR: what it is and who it suits

Here is the Fulbat FP12-18FR, a battery for UPS and standby systems. Standby batteries are judged on voltage, capacity and terminal fit. Facility managers buy batteries online for planned replacement cycles.

Nothing unusual about 18Ah: a standard capacity for UPS and standby systems.

Questions and answers

Quick compatibility checklist

• ✓ Measure the space available: the case takes up 181.5 × 76.5 × 167.5 mm, and a few millimetres too many can stop the hold-down from closing.
• ✓ Capacity 18Ah: equal to or a little above your old label is ideal.
• ✓ These are T12 terminals. Photograph the old ones before ordering to compare side by side.

Explore more

Prefer to compare first? The links below lead to other options for UPS and standby systems on baterias.online. Recycling the old battery is easy at most tips and garages.

• Other batteries for UPS and standby systems
• All Fulbat products on baterias.online

About the technology: AGM

Gas produced during charging recombines inside an AGM battery, so it loses almost no water. Many modern cars with brake energy recovery were designed around AGM from the start. Recharge an AGM battery promptly after deep use.