Kronobat 5 PzB 500 battery for motive power and work machines, rated 600Ah 2V
Made for traction and industrial equipment: Kronobat 5 PzB 500, 600Ah 2V. Built as a lead-acid battery.
- Nominal voltage: 2V
- Capacity, 20-hour rate (C20): 600Ah
- Dimensions (L × W × H): 93 × 157 × 604 mm
- Technology: Lead-acid
In short: Put simply: Kronobat 5 PzB 500, rated 600Ah 2V, sold for traction and industrial equipment. Measure twice, order once: dimensions decide most swaps.
Practical advice for traction and industrial equipment
Rental fleets see machines handed back with batteries drained to the limit. Reconnect the blocks following the original wiring diagram. Grime and acid residue on top create leakage currents that drain the set.
Technical figures at a glance
What lead-acid means for you
Six cells of about two volts each make up a typical 12-volt battery. Lead-acid suits traction and industrial equipment where simplicity and value count. Keep a flooded battery charged in cold weather.
Your questions answered
Can you give me the size and weight of this battery?
Length, width and height are 93 × 157 × 604 mm, and the weight is 26 kg. Compare with the space available, including clearance above the posts.
Is the Kronobat 5 PzB 500 suitable for a 2V system?
Nominal voltage is 2V and capacity 600Ah. Wiring two in series doubles the voltage, while parallel wiring doubles the capacity.
About the Kronobat 5 PzB 500
Forklift, buggy or platform running on a Kronobat 5 PzB 500? Read on. Deep-cycle construction takes daily draining and refilling in its stride. Work-machine batteries online are much easier to match by maker and code.
Few batteries for traction and industrial equipment store more than 600Ah. 26 kg makes it one of the lighter options for its capacity.
Explore more
Everything you need to order the Kronobat 5 PzB 500 is on this page. Have a spanner and a wire brush ready on the day.
Five checks for a perfect fit
- ✓ Stored energy reserve: 600Ah. Going much lower than your current battery can leave you short on cold mornings or long stops.
- ✓ Sticking with lead-acid avoids surprises, unless your vehicle maker approves a change.
- ✓ Dimensions to compare: 93 × 157 × 604 mm. Do not forget the base ledge, which the hold-down clamp grips on many vehicles.
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent