Kronobat 5 PzS 400 battery for motive power and work machines, rated 480Ah 2V
Kronobat 5 PzS 400, listed for traction and industrial equipment. All published figures are listed below.
- Nominal voltage: 2V
- Amp-hours at C20: 480Ah
- Outer measurements: 99 × 198 × 402 mm
- Technology: Lead-acid
Quick answer: Quick facts on the Kronobat 5 PzS 400: intended for traction and industrial equipment, rated 480Ah 2V. Terminal position is the detail people most often forget.
Kronobat 5 PzS 400 for traction and industrial equipment
If the maintenance sheet lists the Kronobat 5 PzS 400, this page has the details. Plan the lift: 22 kg is too much for bare hands. Ordering online saves time when a machine is out of action.
Expect everyday performance from 480Ah in traction and industrial equipment. 22 kg keeps the load down, useful on bikes, boats and motorhomes.
Will the Kronobat 5 PzS 400 fit?
- ✓ Dimensions to compare: 99 × 198 × 402 mm. Do not forget the base ledge, which the hold-down clamp grips on many vehicles.
- ✓ With 480Ah of capacity, hold it up to the figure on the outgoing unit or in your equipment manual.
- ✓ Technology to match: lead-acid. Moving to a different chemistry may need settings changed in your system.
Technical figures at a glance
Frequently asked questions
Does a battery lose charge on the shelf?
Yes, but all batteries self-discharge slowly. Check the voltage every few months and recharge if needed.
What size is the Kronobat 5 PzS 400 and how much does it weigh?
At 99 × 198 × 402 mm and 22 kg, it needs a tray of that size and a careful lift.
How lead-acid batteries work and how to look after them
Some lead-acid batteries have removable caps, others are sealed for life. Conventional batteries deliver high current at a modest price. Store flooded batteries charged and recharge every few months.
See also
Codes matching and measurements agreeing? The Kronobat 5 PzS 400 can go straight into your basket at baterias.online. Recycling the old battery is easy at most tips and garages.
Fitting and everyday care
Rental fleets see machines handed back with batteries drained to the limit. Follow the wiring diagram when reconnecting blocks. Loose cables can melt terminals.
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent