Kronobat 6 PzS 540: traction battery for golf buggies and access platforms 648Ah 2V
Battery for traction and industrial equipment: Kronobat 6 PzS 540. Check size and terminal side in the table below.
- Volts: 2V
- Capacity (C20): 648Ah
- Size L × W × H: 119 × 198 × 477 mm
- Chemistry: Lead-acid
In short: What you are looking at: the Kronobat 6 PzS 540, a 648Ah 2V battery for traction and industrial equipment. Matching technology keeps the charging system happy.
Fitting and everyday care
A pallet truck in a supermarket stockroom works every shift. Charge in a ventilated area away from sparks. Operators complaining of sluggish machines by mid-afternoon are often describing worn batteries.
Kronobat 6 PzS 540: dimensions and ratings
About the technology: lead-acid
During discharge, the plates and acid form lead sulphate and water. Flooded batteries handle hot engine bays well. Check the electrolyte level a few times a year if the battery has removable caps.
Answers before you buy
Is the Kronobat 6 PzS 540 suitable for a 2V system?
It is a 2V battery with a capacity of 648Ah. In banks of several units, connect only identical batteries bought at the same time.
Can I use my usual charger with this battery?
Most smart chargers have a mode for lead-acid. Select it before charging; an unsuitable programme can shorten battery life.
Buying the Kronobat 6 PzS 540 online
A full shift of work on one charge is what the Kronobat 6 PzS 540, rated 648Ah 2V, delivers. Chargers need to match voltage and chemistry. A photo of the old label makes the search quick.
With 648Ah, it sits among the larger batteries for traction and industrial equipment.
More options
You will find this battery in the traction and industrial equipment section of baterias.online, ready to order. Checking the terminal side takes ten seconds and saves a lot of bother.
Five checks for a perfect fit
- ✓ Outside dimensions are 119 × 198 × 477 mm. Run a tape measure over your tray or compartment, including the height under the bonnet or lid.
- ✓ Capacity 648Ah: equal to or a little above your old label is ideal.
- ✓ Set your charger to lead-acid before the first charge.
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent