12VVolts
11AhAmp-hours at C20
150ACold cranking amps
Quick answer: One code, one battery: Motobatt MBT12B4, 11Ah 12V 150A, for motorcycles and quads. Weight is 3.52 kg, worth knowing before you lift it out of the tray.
Using it day to day: practical tips
Commuter scooters do short hops every day and rarely give the battery a full charge. Photograph the cable routing before removing the old battery, especially where leads run under the frame. A swollen case or a smell of acid means the battery should be recycled.
Motobatt MBT12B4 data sheet
ManufacturerMotobatt
ReferenceMBT12B4
Product lineMOTOBATT QUADFLEX
Suitsmotorcycles and quads
Volts12V
Amp-hours at C2011Ah
Cold cranking amps150A
ChemistryAGM
Outer measurements150 × 70 × 130 mm
Battery weight3.52 kg
How AGM batteries work and how to look after them
Compression inside the case is part of what makes glass-mat batteries so sturdy. Alarm panels and UPS units are classic homes for small AGM blocks. Charge an AGM battery in a cool, ventilated place.
Your questions answered
What family does this battery come from?
Yes: it is part of MOTOBATT QUADFLEX. Other members of that family use the same technology.
Can I use the Motobatt MBT12B4 instead of my old battery?
Measure the outgoing battery, note its terminal corner and ratings; matching figures mean a compatible swap.
Can I buy this motorcycles and quads battery online?
Search for Motobatt MBT12B4, open the page, check the specifications against your current battery and add it to the basket. Checkout takes a few steps and is completed online.
Buying the Motobatt MBT12B4 online
Sized for the tight battery boxes of motorcycles and quads: that is the Motobatt MBT12B4. A cranking rating of 150A gives a cold engine a decent spin. Riders order batteries online to avoid riding a dead bike to the dealer.
11Ah puts it squarely in the middle of the range for motorcycles and quads.
Explore more
Prefer to order now and fit at the weekend? baterias.online makes that easy. Checking the terminal side takes ten seconds and saves a lot of bother.
Check before ordering
- ✓ Starting current 150A: look for the EN value on your old label and choose this reference only if it is equal or higher.
- ✓ The technology is AGM. Keep the same type as the original, and confirm your charger offers a matching profile.
- ✓ Check 150 × 70 × 130 mm against the tray, not just the old battery.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent