Ritar FT12-100A · 100Ah 12V · backup battery for UPS, alarm panels and telecom racks

At a glance: For UPS and standby systems there is the Ritar FT12-100A, carrying a 100Ah 12V rating. The code FT12-100A on your old label is the quickest confirmation.

Ritar FT12-100A: what it is and who it suits

Spotted Ritar FT12-100A printed on the case of a standby battery? That code leads here. Measuring 508 × 111 × 236 mm, it needs the same space as the original block. Batteries online for alarms and UPS are filed by maker and code.

100Ah sits towards the top of the range for UPS and standby systems.

Ritar FT12-100A data sheet

Practical advice for UPS and standby systems

Hospitals rely on standby batteries for critical equipment. Check the UPS display after fitting new batteries. Swollen cases point to overcharging or old age.

How AGM batteries work and how to look after them

Nothing sloshes around in a glass-mat battery, because every drop of acid is held in the separators. Backup systems rely on AGM because it can wait, fully charged, for years without fuss. Old-fashioned chargers without automatic cut-off are a poor match for glass-mat batteries.

Will the Ritar FT12-100A fit?

• ✓ Stored energy reserve: 100Ah. Going much lower than your current battery can leave you short on cold mornings or long stops.
• ✓ Connector style: M8. Look closely at the old battery's posts or tabs and make sure they are the same type.
• ✓ Check that the alternator or controller suits AGM.

Questions buyers ask about the Ritar FT12-100A

More options

Ordering the Ritar FT12-100A online at baterias.online is simple once the code checks out. Other Ritar models are linked below if you need a different size from the same maker.

• Browse the full range for UPS and standby systems
• More from Ritar