Ritar RL2400 standby battery for backup systems, rated 400Ah 2V
Looking for Ritar RL2400? A 400Ah 2V battery for UPS and standby systems. Match the terminal side.
- Volts: 2V
- Amp-hours at C10: 400Ah
- Outer measurements: 170 × 150 × 342 mm
- Battery technology: AGM
At a glance: Drivers and owners of UPS and standby systems know this one as the Ritar RL2400. Terminals are of the F10(M8) type, so make sure your clamps suit them.
Practical advice for UPS and standby systems
Server rooms that run warm age standby batteries quickly. Take old batteries to an authorised recycling point and tape over the terminals. Forgetting to note installation dates leads to batteries left in service far too long.
Technical figures at a glance
About the technology: AGM
Picture a sponge holding the acid: that is roughly how an AGM cell works. Many modern cars with brake energy recovery were designed around AGM from the start. Keep AGM terminals clean and tight.
Alternatives that fit the same space
If you prefer another make, these fit the same space with the same terminal side.
Long MSK300Ritar RL2300
Your questions answered
Do I need adapters for the Ritar RL2400?
Terminal type: F10(M8). Compare with the posts or tabs on your current battery.
Which product line does the Ritar RL2400 belong to?
This reference sits within RITAR RL. Browse the brand page to see the neighbouring sizes of the same range.
Will the Ritar RL2400 replace my old battery?
Read the part number on your existing battery and look up the original fitment in the manual. If either points to RL2400, or the figures agree, it will work.
Ritar RL2400: what it is and who it suits
Spotted Ritar RL2400 printed on the case of a standby battery? That code leads here. Weighing 19 kg, it is easy to handle in a rack or alarm housing. Buying batteries online by exact reference avoids mixing makes in one UPS string.
400Ah sits towards the top of the range for UPS and standby systems. Lifting it in is easy at 19 kg, light for a battery of this capacity.
See also
Got the old battery's label in front of you? Compare it once more, then order online at baterias.online. Bookmark this page if you want the data sheet to hand while fitting.
Five checks for a perfect fit
- ✓ Dimensions to compare: 170 × 150 × 342 mm. Do not forget the base ledge, which the hold-down clamp grips on many vehicles.
- ✓ With 400Ah of capacity, hold it up to the figure on the outgoing unit or in your equipment manual.
- ✓ These are F10(M8) terminals. Photograph the old ones before ordering to compare side by side.
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent