12VVoltage
12AhCapacity, 20-hour rate (C20)
200AStarting power (EN)
At a glance: Built for motorcycles and quads, the Exide AGM12-12 carries the rating 12Ah 12V 200A. Terminal position is the detail people most often forget.
Using it day to day: practical tips
Adventure bikes loaded with heated grips and sat-nav ask more of the battery. Route the vent hose, if there is one, well away from the chain and exhaust. Small bike batteries often last only a few seasons.
Measurements, ratings and codes
BrandExide
Model codeAGM12-12
Product lineEXIDE MOTORCYCLE AGM 12V
Suitsmotorcycles and quads
Voltage12V
Capacity, 20-hour rate (C20)12Ah
Starting power (EN)200A
TechnologyAGM
Outer measurements150 × 90 × 145 mm
Battery weight4.5 kg
Polaritypositive on the left-hand side
TerminalsM04
Barcode3661024034029
How AGM batteries work and how to look after them
Nothing sloshes around in a glass-mat battery, because every drop of acid is held in the separators. Wheelchairs and scooters often use AGM for clean, sealed power. Replace an AGM battery whose case has bulged.
Same case, same terminal side
Other references from our catalogue with the same measurements and terminal position.
Exide AGM12-12MExide ETX14-BSVarta YTX14-BSExide GEL12-14Varta 516909024
Questions buyers ask about the Exide AGM12-12
Should I charge a stored battery before use?
It is a good idea. All batteries lose some charge on the shelf, so a top-up before fitting helps.
Will the Exide AGM12-12 fit my battery space?
Overall it is 150 × 90 × 145 mm (L × W × H) and tips the scales at 4.5 kg. Weight is a good clue to how much active material is inside.
Is the Exide AGM12-12 right for you?
Riding a bike that takes a Exide AGM12-12? This is the page. With 200A for starting, a cold engine gets a fair spin. Searching batteries online by exact code beats squinting at photos of near-identical boxes.
12Ah is right in the usual range for motorcycles and quads.
More options
When the numbers match, the Exide AGM12-12 can be ordered online at baterias.online in a few minutes. Checking the terminal side takes ten seconds and saves a lot of bother.
Quick compatibility checklist
- ✓ Capacity is 12Ah. Aim for the same figure as your old battery or slightly above, never much lower.
- ✓ Starting current 200A: look for the EN value on your old label and choose this reference only if it is equal or higher.
- ✓ Photograph your old terminals and compare with M04.
