Exide EA681 | everyday motoring, hatchbacks to light vans | 68Ah 12V 650A images
Exide
Ref. BON-EXIDE-EA681 Exide EA681 | everyday motoring, hatchbacks to light vans | 68Ah 12V 650A
- Nominal voltage
- 12V
- Capacity, 20-hour rate
- 68Ah
- Cold cranking current (EN)
- 650A
- Dimensions (mm)
- 277×175×190
- Battery technology
- Lead-acid
Shipping and lead times
- Mainland Spain1-2 working days · order before 17:00Free
- Express «14 horas»Next day before 16:00 · order before 17:30By weight
- Balearic Islands1-3 working daysBy weight
- Portugal3-4 working daysBy weight
- Europe: FR, IT, DE, BE, NL1-5 working daysBy weight
Canary Islands, Ceuta and Melilla: ask us.
Payment: Bank transferCash on delivery (+4 %, min. €4)
EU businesses with a VAT number: buy without VAT.
In short: What you are looking at: the Exide EA681, a 68Ah 12V 650A battery for cars and vans. Every figure that decides the fit is in the table below.
Buying the Exide EA681 online
Found Exide EA681 printed on the battery lid? That code leads here. Rated 68Ah 12V 650A, it lines up with the original in cars that came with this code. Batteries online make sense when you can check every number from your driveway.
68Ah is right in the usual range for cars and vans. 650A beats many larger batteries for cranking.
12VVolts
68AhCapacity (C20)
650AStarting power (EN)
Quick compatibility checklist
- ✓ Chemistry: lead-acid. Some vehicles and chargers are programmed for a specific type, so check before swapping.
- ✓ Measure the space available: the case takes up 277 × 175 × 190 mm, and a few millimetres too many can stop the hold-down from closing.
- ✓ Orientation matters: positive on the left-hand side on this model. Stand facing the long side with the terminals nearest you to compare.
Exide EA681: dimensions and ratings
| Manufacturer | Exide |
| Part number | EA681 |
| Product line | EXIDE Premium |
| Suits | cars and vans |
| Volts | 12V |
| Capacity (C20) | 68Ah |
| Starting power (EN) | 650A |
| Battery technology | Lead-acid |
| Outer measurements | 277 × 175 × 190 mm |
| Weight | 17 kg |
| Polarity | positive on the left-hand side |
| EAN barcode | 3661024034319 |
Common questions about the Exide EA681
Which corner holds the positive post on the Exide EA681?
The layout is positive on the left-hand side. Check the original before ordering, because the same case size is often sold in both orientations.
Does my charger suit the technology of this battery?
It is built with lead-acid technology. Pick charging equipment with a matching mode and avoid storing it discharged.
lead-acid: how it works
Charging reverses the chemistry and restores the plates. Older cars without auto-stop run happily on flooded batteries. Recycle old batteries at an authorised point.
See also
Keep the code EA681 handy for next time: it makes reordering at baterias.online quick. If in doubt about the fit, compare once more with the figures above.
Fitting and everyday care
Short school runs and supermarket trips never give a car battery the chance to refill properly. Keep tools away from both posts at once to avoid sparks. Electrical gremlins after a battery swap are often just a loose clamp.
-
Brand
-
ReferenceBON-EXIDE-EA681
-
EAN133661024034319
-
MPNEA681
Specifications
| Brand | Exide |
|---|---|
| Product line | EXIDE Premium |
| Used for | Cars and vans |
| Battery technology | Lead-acid |
| Nominal voltage | 12V |
| Capacity, 20-hour rate | 68Ah |
| Cold cranking current (EN) | 650A |
| Length | 277 mm |
| Width | 175 mm |
| Height | 190 mm |
| Weight | 17 kg |
| Terminal polarity | Positive on the left-hand side |
Documents
4 other products in the same category
Viewed products
UPS and Standby
Long WP18-12SHR standby battery for backup systems
- 12V
- 18Ah
- Dimensions: 181×76×167 mm
Price:
€83.58
VAT incl.
Car
Exide EB712 car battery replacement
- 12V
- 71Ah
- 670A
- Dimensions: 278×175×175 mm
Price:
€72.31
VAT incl.