12VVolts
75AhAmp-hours at C20
13.3 kgBattery weight
Summary: Drivers and owners of mobility scooters and wheelchairs know this one as the Fullriver HC75. Terminal position is the detail people most often forget.
Installation and maintenance tips
Holiday trips with a travel scooter mean charging in hotel rooms. Keep the charger lead tidy to avoid trips. Unplugging mid-charge as a habit keeps batteries out of balance.
Technical figures at a glance
Care tips for AGM batteries
Oxygen formed at one plate travels through the mat and recombines at the other. Wheelchairs and scooters often use AGM for clean, sealed power. Replace an AGM battery whose case has bulged.
Common questions about the Fullriver HC75
Can you give me the size and weight of this battery?
At 300 × 182 × 187.5 mm, measure the tray or compartment carefully. Plan the lift too: 13.3 kg is heavier than it looks.
Which voltage does the Fullriver HC75 run at?
Voltage is 12V, capacity 75Ah. Check your equipment runs on the same voltage before ordering.
Can I use my usual charger with this battery?
Look at the sticker on the battery you have now. If it also says AGM, this is a like-for-like choice. If not, check your vehicle or system can handle the change.
Fullriver HC75: what it is and who it suits
Rated 75Ah 12V, the Fullriver HC75 serves mobility scooters and wheelchairs. Every figure published for the Fullriver HC75 is on this page. Search Fullriver HC75 and the right page comes up straight away.
75Ah sits in the comfortable middle for mobility scooters and wheelchairs. 13.3 kg is easy on backs and on vehicle weight limits.
See also
Happy with the fit? Ordering the Fullriver HC75 at baterias.online is quick. If in doubt about the fit, compare once more with the figures above.
Check before ordering
- ✓ Terminal check: AP. Spade widths and post diameters vary, so match the type exactly.
- ✓ Technology to match: AGM. Moving to a different chemistry may need settings changed in your system.
- ✓ Tape measure time: 300 × 182 × 187.5 mm is the footprint and height of this case. Leave a little clearance for the clamp and the cable lugs.
