Fulmen
Ref. BON-FULMEN-FK1050 Fulmen FK1050 – 105Ah 12V 950A – made for frequent restarts in city traffic
- Nominal voltage
- 12V
- Capacity, 20-hour rate
- 105Ah
- Cold cranking current (EN)
- 950A
- Dimensions (mm)
- 392×175×190
- Battery technology
- AGM
Shipping and lead times
- Mainland Spain1-2 working days · order before 17:00Free
- Express «14 horas»Next day before 16:00 · order before 17:30By weight
- Balearic Islands1-3 working daysBy weight
- Portugal3-4 working daysBy weight
- Europe: FR, IT, DE, BE, NL1-5 working daysBy weight
Canary Islands, Ceuta and Melilla: ask us.
Payment: Bank transferCash on delivery (+4 %, min. €4)
EU businesses with a VAT number: buy without VAT.
Quick answer: Spec sheet headline for the Fulmen FK1050: 105Ah 12V 950A, made with start-stop vehicles in mind. Matching technology keeps the charging system happy.
Fulmen FK1050: what it is and who it suits
Made for start-stop vehicles, the Fulmen FK1050 copes with dozens of restarts on a single commute. Stop-start cars expect the same chemistry they were built with, and the table below names it. Searching by brand and reference rules out near misses.
With 105Ah, it sits among the larger batteries for start-stop vehicles.
Full specifications of the Fulmen FK1050
| Manufacturer | Fulmen |
| Model code | FK1050 |
| Series | FULMEN AGM |
| Suits | start-stop vehicles |
| Nominal voltage | 12V |
| Capacity, 20-hour rate (C20) | 105Ah |
| Starting power (EN) | 950A |
| Chemistry | AGM |
| Dimensions (L × W × H) | 392 × 175 × 190 mm |
| Weighs | 29 kg |
| Terminal polarity | positive on the right-hand side |
| EAN barcode | 3661024046299 |
Practical advice for start-stop vehicles
A car stuck in roadworks traffic restarts its engine every few metres. Give the car a run on open roads during the first week. After five or six years of city driving, most stop-start batteries are ready for retirement.
About the technology: AGM
Open up an AGM battery in your imagination and you would find the acid soaked into thin glass-fibre sheets squeezed against each plate. Cold starts are easier with AGM thanks to strong current delivery. Keep AGM terminals clean and tight.
Before you order: a quick checklist
- ✓ A case of 392 × 175 × 190 mm must sit flat with the clamp closed.
- ✓ Before ordering, glance at your current battery: this reference is positive on the right-hand side, and your cables need to reach that corner.
- ✓ Capacity is 105Ah. Aim for the same figure as your old battery or slightly above, never much lower.
Questions and answers
Can I buy the Fulmen FK1050 online?
Yes. On baterias.online each product for start-stop vehicles has its own page: confirm the data, place it in your cart and pay online.
Which code identifies my existing battery?
Check the owner's manual for the original battery, or measure the old one and note its terminal layout and ratings. Then compare with models on baterias.online.
How much weight should I expect to lift?
29 kg is the listed weight. For larger batteries, a second pair of hands makes fitting safer.
Same case, same terminal side
If you prefer another make, these fit the same space with the same terminal side.
Deta DK1050Exide EL1050Fulmen FL1050Tudor TL1050Deta DK1060
Explore more
Happy with the fit? Ordering the Fulmen FK1050 at baterias.online is quick. Other Fulmen models are linked below if you need a different size from the same maker.
-
Brand
-
ReferenceBON-FULMEN-FK1050
-
EAN133661024046299
-
MPNFK1050
Specifications
| Brand | Fulmen |
|---|---|
| Product line | FULMEN AGM |
| Used for | Start-stop vehicles |
| Battery technology | AGM |
| Nominal voltage | 12V |
| Capacity, 20-hour rate | 105Ah |
| Cold cranking current (EN) | 950A |
| Length | 392 mm |
| Width | 175 mm |
| Height | 190 mm |
| Weight | 29 kg |
| Terminal polarity | Positive on the right-hand side |
Documents
4 other products in the same category
- 12V
- 70Ah
- 760A
- Dimensions: 278×175×190 mm
- 12V
- 96Ah
- 850A
- Dimensions: 353×175×190 mm