Long KPH105-12AN – uninterruptible power, security panels and exit lighting – 105Ah 12V

Quick answer: Short version: Long KPH105-12AN, made for UPS and standby systems, with a rating of 105Ah 12V. Before anything else, measure the space: the case comes to 307 × 168 × 214 mm.

Specifications table

Long KPH105-12AN in everyday use

Telecom cabinets at the roadside see heat in summer and frost in winter. Check whether the UPS allows hot-swapping before pulling batteries out. Heat is the biggest cause of early standby battery failure.

Same size and layout

Other references from our catalogue with the same measurements and terminal position.

Long KPH100-12ANLong WXL12365WNRitar HT12-80

Is the Long KPH105-12AN right for you?

Many offices and shops keep their backup running on a Long KPH105-12AN. Spade terminals come in different widths, so check them closely. Batteries online for UPS and alarms are easiest to order by the code printed on the case.

With 105Ah, it outlasts most batteries for UPS and standby systems on a single charge.

Questions and answers

Will the Long KPH105-12AN fit?

• ✓ Chemistry: AGM. Some vehicles and chargers are programmed for a specific type, so check before swapping.
• ✓ Make room for 307 × 168 × 214 mm, including clearance above the posts.
• ✓ The capacity rating, 105Ah, should suit the consumers you run. Lots of electrical equipment calls for the higher end.

More options

Everything you need to order the Long KPH105-12AN is on this page. Measuring the space before ordering avoids a battery that will not sit flat.

• More for UPS and standby systems
• See every Long reference

Care tips for AGM batteries

Valve-regulated construction keeps an AGM case closed during normal life. Glass-mat batteries recover well after a deep discharge compared with flooded ones. Keep AGM batteries away from sustained heat, which shortens their life.