Long WP4B-5 · 2.3Ah 12V · backup battery for UPS, alarm panels and telecom racks
UPS and standby systems? Try the Long WP4B-5. All published figures are listed below.
- Voltage: 12V
- Amp-hours at C20: 2.3Ah
- Size L × W × H: 113 × 38 × 85.5 mm
- Battery technology: AGM
Quick answer: For UPS and standby systems there is the Long WP4B-5, carrying a 2.3Ah 12V rating. Nominal voltage is 12V, the same as most equipment of this kind.
Long WP4B-5 for UPS and standby systems
Many offices and shops keep their backup running on a Long WP4B-5. Whether a standby block fits comes down to four things, all listed below: volts, amp-hours, size and connector style. A photo of the old case label makes the search quick.
2.3Ah suits engines with modest electrical demands.
Make sure it fits your vehicle or equipment
- ✓ The technology is AGM. Keep the same type as the original, and confirm your charger offers a matching profile.
- ✓ Measure the space available: the case takes up 113 × 38 × 85.5 mm, and a few millimetres too many can stop the hold-down from closing.
- ✓ With 2.3Ah of capacity, hold it up to the figure on the outgoing unit or in your equipment manual.
Full specifications of the Long WP4B-5
Answers before you buy
How big and heavy is this Long battery?
Length, width and height are 113 × 38 × 85.5 mm, and the weight is 1.12 kg. Compare with the space available, including clearance above the posts.
What are the voltage and capacity of this model?
Voltage is 12V, capacity 2.3Ah. Check your equipment runs on the same voltage before ordering.
What AGM means for you
Gas produced during charging recombines inside an AGM battery, so it loses almost no water. Because nothing can spill, AGM batteries can live inside a cabin, a boot or under a seat. Never try to open an AGM battery to add water.
Explore more
Everything on baterias.online is filed by brand and reference, so ordering the Long WP4B-5 is straightforward. Checking the data first saves the hassle of a wrong order.
Practical advice for UPS and standby systems
Home alarm panels beep at night when their batteries weaken. Check the charging voltage setting on the equipment. Mixing old and new batteries in one UPS cuts runtime and harms the new blocks.
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent