New
Out-of-Stock

Long MSK100A, a battery for UPS units | baterias.online

Long MSK100A standby battery for backup systems, rated 100Ah 2V

Long MSK100A for UPS and standby systems · listed by code. Compare with the label on your current battery.

Volts: 2V
Capacity (C20): 100Ah
Outer measurements: 170 × 72 × 208 mm
Chemistry: AGM

Notify me when available

Interested in this product? Drop us an email and we will let you know when it's available for order.

2VVolts

100AhCapacity (C20)

7.5 kgWeight

At a glance: One code, one battery: Long MSK100A, 100Ah 2V, for UPS and standby systems. Measure twice, order once: dimensions decide most swaps.

Installation and maintenance tips

Gate motors and access systems rely on backup batteries when the mains drops. Ventilate battery cabinets properly. Forgetting to note installation dates leads to batteries left in service far too long.

Full specifications of the Long MSK100A

MakeLong

Part numberMSK100A

Product lineMSK Series

ApplicationUPS and standby systems

Volts2V

Capacity (C20)100Ah

ChemistryAGM

Outer measurements170 × 72 × 208 mm

Weight7.5 kg

AGM: how it works

AGM stands for absorbent glass mat, a fancy name for a very tidy way of storing acid. Many modern cars with brake energy recovery were designed around AGM from the start. Do not mix AGM and flooded batteries in one bank.

Your questions answered

Can you give me the size and weight of this battery?

Length, width and height are 170 × 72 × 208 mm, and the weight is 7.5 kg. Compare with the space available, including clearance above the posts.

Which voltage does the Long MSK100A run at?

Nominal voltage is 2V and capacity 100Ah. Wiring two in series doubles the voltage, while parallel wiring doubles the capacity.

Is the Long MSK100A right for you?

Made for UPS and standby systems, the Long MSK100A waits on float for years and takes over in an instant. Whether a standby block fits comes down to four things, all listed below: volts, amp-hours, size and connector style. A photo of the old case label makes the search quick.

Big reserve: 100Ah is high for UPS and standby systems. Weight comes in at 7.5 kg, on the light side for its class.

Explore more

Prefer to compare first? The links below lead to other options for UPS and standby systems on baterias.online. Not quite the right size? Have a look at other batteries for UPS and standby systems.

Quick compatibility checklist

✓ Dimensions to compare: 170 × 72 × 208 mm. Do not forget the base ledge, which the hold-down clamp grips on many vehicles.
✓ Rated 100Ah: check that the charger or alternator in your system can refill a battery of that capacity in reasonable time.
✓ The technology is AGM. Keep the same type as the original, and confirm your charger offers a matching profile.