Q-Battery 12LS-4.5 – uninterruptible power, security panels and exit lighting – 4.5Ah 12V

Quick answer: Spec sheet headline for the Q-Battery 12LS-4.5: 4.5Ah 12V, made with UPS and standby systems in mind. Terminals are of the F1 (4,75mm) type, so make sure your clamps suit them.

Technical figures at a glance

Installation and maintenance tips

A small business loses its card machine if the UPS battery fails. Run a self-test after the fresh blocks have charged. Heat ages standby batteries faster than anything else.

Alternatives that fit the same space

Listed below: batteries with the same case and polarity as the Q-Battery 12LS-4.5.

Long WP4.5-12Ritar RT1245Long WP5-12Long WP5-12SHRLong WPL5-12

Q-Battery 12LS-4.5: what it is and who it suits

Spotted Q-Battery 12LS-4.5 printed on the case of a standby battery? That code leads here. Sealed construction lets it sit in a cabinet for years. Ordering online saves a trip to the electrical wholesaler.

4.5Ah makes it a smaller battery, good for light electrical loads.

Questions buyers ask about the Q-Battery 12LS-4.5

Check before ordering

• ✓ A case of 90 × 70 × 107 mm must sit flat with the clamp closed.
• ✓ Stored energy reserve: 4.5Ah. Going much lower than your current battery can leave you short on cold mornings or long stops.
• ✓ With F1 (4,75mm) terminals, some installations need a different clamp or adapter. Check before fitting.

See also

Keep the code 12LS-4.5 handy for next time: it makes reordering at baterias.online quick. Once the battery is in, keep the old one for recycling at an authorised point.

• Browse the full range for UPS and standby systems
• All Q-Battery products on baterias.online

About the technology: AGM

Oxygen formed at one plate travels through the mat and recombines at the other. Backup systems rely on AGM because it can wait, fully charged, for years without fuss. Too much voltage makes the valves vent gas that can never be replaced.