Long WP12A-BS · 9.5Ah 12V · backup battery for UPS, alarm panels and telecom racks
UPS and standby systems? Try the Long WP12A-BS. Full data sheet below.
- Volts: 12V
- Capacity, 20-hour rate (C20): 9.5Ah
- Size L × W × H: 151 × 88 × 103 mm
- Chemistry: AGM
Summary: Need a battery for UPS and standby systems? Consider the Long WP12A-BS, rated 9.5Ah 12V. Every figure that decides the fit is in the table below.
About the Long WP12A-BS
Silent and ready for years: that is the life of the Long WP12A-BS, rated 9.5Ah 12V. At 3.56 kg, swapping it takes one pair of hands. Every standby battery at baterias.online lists its terminal type.
Nothing unusual about 9.5Ah: a standard capacity for UPS and standby systems.
Before you order: a quick checklist
- ✓ This reference uses AGM. If your current battery has a different technology printed on it, find out why before switching.
- ✓ Tape measure time: 151 × 88 × 103 mm is the footprint and height of this case. Leave a little clearance for the clamp and the cable lugs.
- ✓ 9.5Ah sets how long the battery can power things with the engine off.
Long WP12A-BS data sheet
Common questions about the Long WP12A-BS
Can I buy this UPS and standby systems battery online?
Yes. On baterias.online each product for UPS and standby systems has its own page: confirm the data, place it in your cart and pay online.
Where is the code on my battery printed?
Use a tape measure and the handbook: the factory fitment listed there tells you which code to search.
Can one person lift this battery?
The weight is 3.56 kg. Heavier batteries generally contain more lead and active material.
The AGM technology explained
Each AGM cell is packed so tightly that the plates barely move, even on a bumpy road. AGM suits UPS and standby systems where a maintenance-free battery makes life easier. Keep AGM batteries away from sustained heat, which shortens their life.
See also
Ordering online at baterias.online is the quick part once the checks are done. Once the battery is in, keep the old one for recycling at an authorised point.
Getting the best from the Long WP12A-BS
A remote pumping station depends on backup power during outages. Run a self-test after the fresh blocks have charged. A UPS that reports a failed battery test needs new batteries soon.
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent